Opinions on repop hood hinges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FL71C10** · 12-29-2019, 02:16 PM

I need one new hood hinge for my truck and I will probably buy a pair. I'm deciding between having mine rebuilt and buying some new ones. I was hoping some people have some experiences to share with new reproductions that they purchased.

Anything to share?

**HO455** · 12-29-2019, 06:33 PM

The PO installed a pair from LMC (I have the receipt) .They open and close fine but I am unable to get the one side to close completely. Close inspection revealed that the rivets are not in the same locations from side to side. There is a difference of about 3/16" which I believe is why no amount of adjustment allows the hood to close properly.
Just my two cents. It may be a one off problem for all I know. I am planning on replacing them with a rebuilt pair when funds allow.

**maverickmk** · 12-29-2019, 06:40 PM

Here's a few hinges for sale.

http://67-72chevytrucks.com/vboard/s...d.php?t=797827

Astro-Balls · 12-29-2019, 07:18 PM

I ordered a pair from Rock Auto, Goodmark brand, fit and work great. I kept my original hinges to be sent out for rebuilding one day...

Andy4639 · 12-30-2019, 10:33 AM

This is the best solution I think.

Call HoodHingeRepair.com
Services.

Here is a thread on his work. There are many threads on this subject. Willie is by far the best solution.

http://67-72chevytrucks.com/vboard/s...d.php?t=525638

http://www.hoodhingerepair.com/

**'68OrangeSunshine** · 12-30-2019, 07:27 PM

Some years ago.* I was able to get a set of hood hinges and springs from the local Chevy dealer. They were made by GM for that vintage, but not during the '67-'72 run. I didn't try them yet, but they looked perfect.
* Looks like they were made by GM in 2004 for '67-'72s.
I looked in my '67 Suburban, and found them. Here are the part numbers:
Hinges -- 3911705, 3911706. [One's Left and the other's the Right.]
Springs -- 3890741 [times 2].

I have no opinion on repops. Why buy offshore, if you can get OEM? Try your dealership.

**PDXk5** · 12-31-2019, 12:28 AM

Quote:

Originally Posted by Andy4639

This is the best solution I think.

Call HoodHingeRepair.com
Services.

Here is a thread on his work. There are many threads on this subject. Willie is by far the best solution.

http://67-72chevytrucks.com/vboard/s...d.php?t=525638

http://www.hoodhingerepair.com/

Willie does great work. He has done my Blazer hatch hinges and I currently am having him do some hood hinges.

12-29-2019, 02:16 PM	#1
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Opinions on repop hood hinges I need one new hood hinge for my truck and I will probably buy a pair. I'm deciding between having mine rebuilt and buying some new ones. I was hoping some people have some experiences to share with new reproductions that they purchased. Anything to share? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

12-29-2019, 06:33 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,393	Re: Opinions on repop hood hinges The PO installed a pair from LMC (I have the receipt) .They open and close fine but I am unable to get the one side to close completely. Close inspection revealed that the rivets are not in the same locations from side to side. There is a difference of about 3/16" which I believe is why no amount of adjustment allows the hood to close properly. Just my two cents. It may be a one off problem for all I know. I am planning on replacing them with a rebuilt pair when funds allow. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

12-29-2019, 06:40 PM	#3
maverickmk Senior Member Join Date: Nov 2019 Location: Cocoa FL Posts: 596	Re: Opinions on repop hood hinges Here's a few hinges for sale. http://67-72chevytrucks.com/vboard/s...d.php?t=797827 __________________ Die with memories, not dreams. Not to brag, but I don't need alcohol to make really bad decisions. 1969 GMC Short Step Side

12-29-2019, 07:18 PM	#4
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: Opinions on repop hood hinges I ordered a pair from Rock Auto, Goodmark brand, fit and work great. I kept my original hinges to be sent out for rebuilding one day... __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA

12-30-2019, 10:33 AM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Opinions on repop hood hinges This is the best solution I think. Call HoodHingeRepair.com Services. Here is a thread on his work. There are many threads on this subject. Willie is by far the best solution. http://67-72chevytrucks.com/vboard/s...d.php?t=525638 http://www.hoodhingerepair.com/ __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-30-2019, 07:27 PM	#6
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,513	Re: Opinions on repop hood hinges Some years ago.* I was able to get a set of hood hinges and springs from the local Chevy dealer. They were made by GM for that vintage, but not during the '67-'72 run. I didn't try them yet, but they looked perfect. * Looks like they were made by GM in 2004 for '67-'72s. I looked in my '67 Suburban, and found them. Here are the part numbers: Hinges -- 3911705, 3911706. [One's Left and the other's the Right.] Springs -- 3890741 [times 2]. I have no opinion on repops. Why buy offshore, if you can get OEM? Try your dealership. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 12-30-2019 at 08:52 PM. Reason: Found the P/Ns.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.