WTB: early One piece dually wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 06-17-2004, 11:24 PM

Anybody in the Seattle area have 4 extra one piece 16" dually wheels with the 1/2 stud holes.. Not a good combination....
I have the later 71 - 72 wheels with the 5/8 hole and I have 1/2 studs.. the next option is 71 - 72 1 ton hubs with the correct studs and lug nuts.. would rather not dissasemble it to change hubs and studs.. wheels would be so much easier..

Anyone????

**kwmech** · 06-17-2004, 11:51 PM

The 1/2'' hole rims are split rim I believe, and require a tube.

Livrat · 06-18-2004, 12:11 AM

I have one piece 1/2" ones on the front with tubes.. So I do know they exist.. but finding more might be another story..

junkyardjohn · 06-18-2004, 11:57 AM

MY 69 1 TON TOWTRUCK HAD SPLITS ON THE DUEL WHEELS IN THE REAR, BUT SOLID 1 PIECE WHEELS ON THE FRONT. I REPLACED THE 1/2" STUDS ON THE REAR WITH 5/8" STUDS SO I COULD USE MODERN 1 PIECE WHEELS.

JOHN

**kwmech** · 06-18-2004, 10:25 PM

I had splits all around on my 69. Changed them all around when I went to disc and a D70.

Edit---try this 1-800- USED RIM They are in L.A.

06-17-2004, 11:24 PM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	WTB: early One piece dually wheels Anybody in the Seattle area have 4 extra one piece 16" dually wheels with the 1/2 stud holes.. Not a good combination.... I have the later 71 - 72 wheels with the 5/8 hole and I have 1/2 studs.. the next option is 71 - 72 1 ton hubs with the correct studs and lug nuts.. would rather not dissasemble it to change hubs and studs.. wheels would be so much easier.. Anyone????

06-18-2004, 11:57 AM	#4
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	MY 69 1 TON TOWTRUCK HAD SPLITS ON THE DUEL WHEELS IN THE REAR, BUT SOLID 1 PIECE WHEELS ON THE FRONT. I REPLACED THE 1/2" STUDS ON THE REAR WITH 5/8" STUDS SO I COULD USE MODERN 1 PIECE WHEELS. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-17-2004, 11:51 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,487	The 1/2'' hole rims are split rim I believe, and require a tube.

06-18-2004, 12:11 AM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	I have one piece 1/2" ones on the front with tubes.. So I do know they exist.. but finding more might be another story..

06-18-2004, 10:25 PM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,487	I had splits all around on my 69. Changed them all around when I went to disc and a D70. Edit---try this 1-800- USED RIM They are in L.A.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.