Clean fuel line connection to Street Demon Carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

G-NUT · 03-31-2020, 12:13 PM

Anyone have any pics or thoughts for clean looking fuel line connection to a Street Demon carb?

**The Rocknrod** · 03-31-2020, 12:20 PM

I'm using the inverted flare/nut fitting sold on eBay and Summit for the Street Demon carb. Since it comes out of the carb at a low angle then 90 forward, then 90 down toward the fuel pump. Simple.

**The Rocknrod** · 03-31-2020, 12:49 PM

They make one that looks like the Edelbrock that goes forward. The problem with this one is you run a garden hose out of it, unless you get a nut and sleeve and flare the tube that heads to the fuel pump.

**The Rocknrod** · 03-31-2020, 12:50 PM

You can use a short piece of rubber and a nipple, 90 the hard line forward.

G-NUT · 04-03-2020, 12:52 PM

Thank you for the responses. I appreciate it.
The fitting in your first response actually came with my carb. I was thinking I might be able to utilize it.

The Edelbrock looking fuel feed I found in an internet search. It's somewhat of what I was looking for, but I want my lines to be black not polished due to the overall look I'm working towards.

03-31-2020, 12:13 PM	#1
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 163	Clean fuel line connection to Street Demon Carb Anyone have any pics or thoughts for clean looking fuel line connection to a Street Demon carb? __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed

03-31-2020, 12:20 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Clean fuel line connection to Street Demon Carb I'm using the inverted flare/nut fitting sold on eBay and Summit for the Street Demon carb. Since it comes out of the carb at a low angle then 90 forward, then 90 down toward the fuel pump. Simple. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 03-31-2020 at 12:54 PM.

03-31-2020, 12:49 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Clean fuel line connection to Street Demon Carb They make one that looks like the Edelbrock that goes forward. The problem with this one is you run a garden hose out of it, unless you get a nut and sleeve and flare the tube that heads to the fuel pump. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 03-31-2020 at 12:56 PM.

03-31-2020, 12:50 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Clean fuel line connection to Street Demon Carb You can use a short piece of rubber and a nipple, 90 the hard line forward. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-03-2020, 12:52 PM	#5
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 163	Re: Clean fuel line connection to Street Demon Carb Thank you for the responses. I appreciate it. The fitting in your first response actually came with my carb. I was thinking I might be able to utilize it. The Edelbrock looking fuel feed I found in an internet search. It's somewhat of what I was looking for, but I want my lines to be black not polished due to the overall look I'm working towards. __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.