![]() |
|
![]() |
#1 |
Senior Member
![]() Join Date: Nov 2018
Location: Waterford California
Posts: 2,700
|
Re: Transmission Lines
|
![]() |
![]() |
![]() |
#2 |
Active Member
![]() Join Date: Jan 2016
Location: Albertville, MN
Posts: 198
|
Re: Transmission Lines
Can you use braided stainless for trans cooling lines and also for fuel lines running from the fuel pump up to the carb with an inline fuel filter? I need to rework a few of my lines.
__________________
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,538
|
Re: Transmission Lines
I used braided stainless with a Teflon inner tube for my fuel pump to carb. If you use rubber inner make sure it’s ethanol resistant.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
![]() |
![]() |
![]() |
#4 |
Active Member
![]() Join Date: Jan 2016
Location: Albertville, MN
Posts: 198
|
Re: Transmission Lines
Where do you usually buy your braided lines?
__________________
![]() |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Feb 2010
Location: rochelle il.
Posts: 357
|
Re: Transmission Lines
Perfect timing i'm about to deal with this. 200r is the same length as the 350 trans. Why couldn't you use 350 turbo trans cooler lines? I see the prebent stainless lines for about $55 bucks. I reread your post see your using after market rad? The pre bent might not work unless your cooler line ports are in the same place as stock.
Last edited by OL SKOOL; 05-18-2020 at 05:50 AM. |
![]() |
![]() |
![]() |
#6 | |
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,538
|
Re: Transmission Lines
Quote:
I was able to straighten them fairly easily, and they fit well with some very minor tweaking. Mine are for a TH400 though.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jun 2018
Location: Munising,Mi
Posts: 360
|
Re: Transmission Lines
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,538
|
Re: Transmission Lines
I got mine from my work, we are an Eaton Weatherhead distributor, so we make hose assemblies. I could make you one if you are interested. You can see it in this pic.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|