charcoal canister...where do the lines go ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue4x4 · 06-22-2004, 10:51 PM

Need some help here. I am just about finished with installing the engine I built, but seem to have forgotten where the lines go from the canister. I do know which one goes to the fuel cell, but the others?????? small and a large one. Thanks.

*Gee_Emm* · 06-23-2004, 09:49 AM

Look closer on the top of the canister. It should be labeled what port is which.

Fred T · 06-23-2004, 01:03 PM

You could do like I did on my 80, I put the lines in the trash can.

Blue4x4 · 06-25-2004, 06:03 PM

I might have to do both. Thanks

06-22-2004, 10:51 PM	#1
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	charcoal canister...where do the lines go ?? Need some help here. I am just about finished with installing the engine I built, but seem to have forgotten where the lines go from the canister. I do know which one goes to the fuel cell, but the others?????? small and a large one. Thanks.

06-23-2004, 01:03 PM	#3
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	You could do like I did on my 80, I put the lines in the trash can. __________________ Fred There is no such thing as too much cam...just not enough engine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-23-2004, 09:49 AM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Look closer on the top of the canister. It should be labeled what port is which.

06-25-2004, 06:03 PM	#4
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	I might have to do both. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.