86 Suburban daily driver

[BlueJeep]

Originally Posted by SCOTI

One 'watch-out'…. Burbs/Blazers are known for issues when c-notching. If you notch it, I would verify there's the same amount of travel available above the different as well. Otherwise, you'll clear @ the axle tube but still hit @ the floor.

Cool family ride for the record!

Thanks! The whole family is on board with it, as soon as I get a few things fixed (including A/C).

Thanks for the heads-up, and I'm already on it! I already measured the space between the top of the diff and the floor, and used that as my measurement as to how deep the notch reasonably should be. I want to cut as little as necessary because hooking up a trailer is still important to me.