AL WTB Nice, original stainless windshield trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**General23cmp** · 07-19-2020, 01:53 PM

Looking for nice front and rear windshield stainless trim for my 72 Chevy PU. I haven’t ordered the rubber yet, so it can be deep or shallow. I’ve heard deep is easier to re-install, so maybe that would be preferred. I would like nice pieces (no aftermarket please) and would pay extra for pre-polishing if needed as I don’t have the equipment nor experience doing that. Thanks.

*randy500* · 07-20-2020, 12:31 PM

I have a set of deep, its real nice and i did a light polish on it to look for defects, i think here is one very tiny ding. $150 plus $60 shipping
I polished this and offered it to another member, i lost track of who it was...you?

**General23cmp** · 07-20-2020, 01:40 PM

I don’t think it was me. I know you and I have dealt before, but I don’t recall any trim discussions. Can you PM me any pictures? Will they need further polished? By “set” do you mean front and rear?

**General23cmp** · 07-21-2020, 10:11 AM

Still looking. That set above was claimed by someone else.

**richard2717** · 07-21-2020, 12:58 PM

I am pretty sure I have some nice shallow sets. I will have to dig them out when I get back home.
I might even have a new gasket

**General23cmp** · 07-21-2020, 01:54 PM

Just let me know. PM me photos and pricing. What brand gasket? Thanks.

**General23cmp** · 07-22-2020, 04:23 PM

Thanks for the time. Judging by the part number, that gasket is Counterparts brand. I assume the trim is shallow flanged, for 71-72, as I think that’s the gasket’s size. I already have some trim with minor dings. My set may be good on that piece and I can make a good total set from yours and mine together. Is it both L shaped pieces that have dings or just one? The top is good? My top had a bad gouge. I’ll have to look at what I have and where it’s dinged. Thanks.

**General23cmp** · 07-22-2020, 04:35 PM

Thanks. Let me take a look at my set and see if this would make a solid complete set. This isn’t a super show truck, but very close. I’m wanting the trim to be very good.

**General23cmp** · 07-22-2020, 05:23 PM

Well darn, my passenger lower is dinged up quite a bit. I’ll keep you in mind, but will have to pass for now. If anyone was following this thread and wants to jump on these two sets, feel free. Thanks again.

**richard2717** · 07-22-2020, 05:39 PM

No worries. I will remove them from here so your ad does not get cluttered. I will post them in my own ad

Thanks

07-19-2020, 01:53 PM	#1
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	WTB Nice, original stainless windshield trim Looking for nice front and rear windshield stainless trim for my 72 Chevy PU. I haven’t ordered the rubber yet, so it can be deep or shallow. I’ve heard deep is easier to re-install, so maybe that would be preferred. I would like nice pieces (no aftermarket please) and would pay extra for pre-polishing if needed as I don’t have the equipment nor experience doing that. Thanks.

07-20-2020, 12:31 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB Nice, original stainless windshield trim I have a set of deep, its real nice and i did a light polish on it to look for defects, i think here is one very tiny ding. $150 plus $60 shipping I polished this and offered it to another member, i lost track of who it was...you?

07-20-2020, 01:40 PM	#3
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	Re: WTB Nice, original stainless windshield trim I don’t think it was me. I know you and I have dealt before, but I don’t recall any trim discussions. Can you PM me any pictures? Will they need further polished? By “set” do you mean front and rear?

07-21-2020, 10:11 AM	#4
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	Re: WTB Nice, original stainless windshield trim Still looking. That set above was claimed by someone else.

07-21-2020, 12:58 PM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,136	Re: WTB Nice, original stainless windshield trim I am pretty sure I have some nice shallow sets. I will have to dig them out when I get back home. I might even have a new gasket __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-21-2020, 01:54 PM	#6
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	Re: WTB Nice, original stainless windshield trim Just let me know. PM me photos and pricing. What brand gasket? Thanks.

07-22-2020, 04:23 PM	#7
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	Re: WTB Nice, original stainless windshield trim Thanks for the time. Judging by the part number, that gasket is Counterparts brand. I assume the trim is shallow flanged, for 71-72, as I think that’s the gasket’s size. I already have some trim with minor dings. My set may be good on that piece and I can make a good total set from yours and mine together. Is it both L shaped pieces that have dings or just one? The top is good? My top had a bad gouge. I’ll have to look at what I have and where it’s dinged. Thanks.

07-22-2020, 04:35 PM	#8
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	Re: WTB Nice, original stainless windshield trim Thanks. Let me take a look at my set and see if this would make a solid complete set. This isn’t a super show truck, but very close. I’m wanting the trim to be very good.

07-22-2020, 05:23 PM	#9
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	Re: WTB Nice, original stainless windshield trim Well darn, my passenger lower is dinged up quite a bit. I’ll keep you in mind, but will have to pass for now. If anyone was following this thread and wants to jump on these two sets, feel free. Thanks again.

07-22-2020, 05:39 PM	#10
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,136	Re: WTB Nice, original stainless windshield trim No worries. I will remove them from here so your ad does not get cluttered. I will post them in my own ad Thanks __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.