8' Upper Bed Moldings w/Clips? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 08-09-2020, 11:16 AM

Would like some thoughts on the WIW question for both sides of the upper bed side molding from an 8' bed. NO major dings or added screws, fit bed quite well with no pulled or bent sections. Was all held in place by the original GM clips which I have also. Removed from '70 3/4 ton and used the clips, not the later sticky adhesive clips GM went to I believe in '72. Driver quality with some minor nicks, nothing major at all. End short molding sections tight with the connecting pieces intact. 12 clips per side, total of 24. One side had one style of clips, other side had another style. Truck showed no signs of a re-paint, do not know whey two different styles on same truck? Two clips have the spring tang missing but think could still be used. Maybe with a dab of silicon?.

**Ironhorse** · 08-12-2020, 12:25 PM

Need a bit of help here with a value guys. Nice driver quality with minimal nicks, no dents or added screw holes. All 24 clips, two have spring tangs broke but still held trim tight to bedside.

**too much stuff** · 08-12-2020, 07:42 PM

If they were mine and someone offered around $40-$50, i would let them go.
Shipping will be a killer on them however.

08-09-2020, 11:16 AM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	8' Upper Bed Moldings w/Clips? Would like some thoughts on the WIW question for both sides of the upper bed side molding from an 8' bed. NO major dings or added screws, fit bed quite well with no pulled or bent sections. Was all held in place by the original GM clips which I have also. Removed from '70 3/4 ton and used the clips, not the later sticky adhesive clips GM went to I believe in '72. Driver quality with some minor nicks, nothing major at all. End short molding sections tight with the connecting pieces intact. 12 clips per side, total of 24. One side had one style of clips, other side had another style. Truck showed no signs of a re-paint, do not know whey two different styles on same truck? Two clips have the spring tang missing but think could still be used. Maybe with a dab of silicon?. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-12-2020, 12:25 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 8' Upper Bed Moldings w/Clips? Need a bit of help here with a value guys. Nice driver quality with minimal nicks, no dents or added screw holes. All 24 clips, two have spring tangs broke but still held trim tight to bedside. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-12-2020, 07:42 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 8' Upper Bed Moldings w/Clips? If they were mine and someone offered around $40-$50, i would let them go. Shipping will be a killer on them however. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.