What did you do today not on your truck...

[72c20customcamper]

Used the Kubota to remove sod wife wants the flower garden bigger .

[FleetsidePaul]

Got the pool cleaned up a little. It's a lot better than the disaster it was. There's still a lot of work to do but I think it's getting there.

Before:




After:

[72c20customcamper]

Looks great Paul

[4u2nv]

Originally Posted by FleetsidePaul

Got the pool cleaned up a little. It's a lot better than the disaster it was. There's still a lot of work to do but I think it's getting there.

Before:




After:

Nice job
Did you paint the concrete around it ??

[Rickysnickers]

Looks great!!

[special-K]

Nice to have that pool area done and looking good. Now it's time to sit back, relax, and think about the maintenance

[FleetsidePaul]

I did stain the concrete blue. It was ugly before. Hopefully it will hold up. Time will tell.

I don't know about sitting back and relaxing yet. I'm rewiring the pump which was a mess. Who puts a junction box in the dirt? The wires were fried and the pool is leaking so I've got to get that fixed. It's and old pool and it has been neglected.

So the money pit continues. Is anyone else as dumb as me to buy a house where absolutely everything is broken?

I don't think you can see the cooked wires in this shot but they're there. (not anymore ).

[Sheepdip]

Originally Posted by FleetsidePaul

I did stain the concrete blue. It was ugly before. Hopefully it will hold up. Time will tell.

I don't know about sitting back and relaxing yet. I'm rewiring the pump which was a mess. Who puts a junction box in the dirt? The wires were fried and the pool is leaking so I've got to get that fixed. It's and old pool and it has been neglected.

So the money pit continues. Is anyone else as dumb as me to buy a house where absolutely everything is broken?

I don't think you can see the cooked wires in this shot but they're there. (not anymore ).

Keep Chipping Away and you'll end up with something similar to this one Paul

[Rickysnickers]

Originally Posted by FleetsidePaul

So the money pit continues. Is anyone else as dumb as me to buy a house where absolutely everything is broken?

Just look at it this way, you'll have lots of content to add to this thread

[FleetsidePaul]

Originally Posted by Rickysnickers

Just look at it this way, you'll have lots of content to add to this thread

Yeah I kind of bit off more than I can chew with this place. I keep telling myself that it's worth it and I think it will be. But right now it's a giant headache. It's a BIG house which is great unless you're remodeling it. Then it's not so good. More isn't always better. I went to replace the outlets and switches. I had to get 47 of them and that doesn't include the barn or the garage. This should be on the stupidity thread.

[72c20customcamper]

Made up some steps for my daughter my granddaughter approves. Railings go up tomorrow. Had to make it larger because there is an egress window under the slider so the basement can be living space

[Lost in the 60's]

Surprised code allows anything over an egress escape opening. I agree with your grand daughter, it does look very nice.

[allchevy58]

Been working on the stem walls, ready for inspection on Tuesday and pour on Saturday.

[special-K]

Don't need no unwanted re-gressin' goin' on

[3757chevy]

I hauled home some Chevy parts from a friends house. I got a front bumper , a set of front fenders , a pair of doors , a step side bed in pieces with fenders , steering box and pump with brackets and instrument panel with gauges for '67-'72. Also got a set of 19" wire wheels , 34-36 master u-joint assm. and a circular heater in parts along with a '39 and a '49 three speed trans. We ran out of room in back of the Burb.

[Getter-Done]

Nice parts haul

You said you run out of room.

Is there a Second trip planned?

[3757chevy]

Not right away. Not any Chevy parts anyway.

[special-K]

What a haul? That's a good load of parts in that Suburban. Those wheels look clean. I love Suburbans

[3757chevy]

Originally Posted by special-K

What a haul? That's a good load of parts in that Suburban. Those wheels look clean. I love Suburbans

Yeah, I took the rear seat out knowing I was going to need the room. I did bring home more than I expected. The wheels are early 30's 19" and they have been blasted and powder coated. I got a set of five.["I love Suburbans"]

[Boog]

You got in mind building another 67-72 stepper?

[72c20customcamper]

Couple of odds and ends left to do. All the balusters are in now . Started on the rail tops need one more piece of cedar to finish. Also need to put a gate up at the stairs going to the basement . Little one is already going down under the deck

[72c20customcamper]

Work on my friends 54 the one with the ferd motor I know it’s a truck but not mine . He bought a new rad that was made for the truck with a 3100 cfm spal fan went in nice and easy he fired up the truck waited for it to warm a little went for a ride . Temps hovered between 190 and 200 with the a/c on while doing 40 mph . He got caught in traffic in town and the temp went to 220 and was still climbing. He limped it home .

I look at it and noticed the fan was hooked up to a toggle switch . First warning sign then I traced the wire and it was 14 gauge . He pulled juice from another circuit to power it . I inquired as to why he didn’t use a relay powered from the battery ? He looks at me like deer in the headlights . I take out my Fluke multimeter and have him turn on the fan little over 9 volts . So I rip all his wires out and jump the fan from the battery with a 10 gauge wire . Fan sounded like it went from low to high setting . Truck idled with the air on for 15 minutes and hovered around 190 .So tomorrow he’s getting the relay and heavier wire . But he’s still going to have it manually switched

Tried to talk him into buying the kit from the company but he said it was too much . Think the radiator and fan were 1k and the wiring kit was too much ?

[3757chevy]

Originally Posted by Boog

You got in mind building another 67-72 stepper?

I almost have enough parts now.

[joedoh]

replaced the foam on the radiator of my mower. it overheated (not really, it triggered a high temp switch that shut the pto deck off) and i learned that the radiator probably had grass in it. i was blowing it out every mow and noticed the scraps of old foam.

john deere sold replacement foams for I-am-not-kidding $643. i ordered some adhesive foam for $18 on amazon. works great!

you can see the grass pulled against the mesh by the vacuum of the radiator fan, previously it was sneaking around the edges of the foam directly to the radiator.

[Getter-Done]

Originally Posted by joedoh

replaced the foam on the radiator of my mower. it overheated (not really, it triggered a high temp switch that shut the pto deck off) and i learned that the radiator probably had grass in it. i was blowing it out every mow and noticed the scraps of old foam.

john deere sold replacement foams for I-am-not-kidding $643. i ordered some adhesive foam for $18 on amazon. works great!

you can see the grass pulled against the mesh by the vacuum of the radiator fan, previously it was sneaking around the edges of the foam directly to the radiator.

They are Proud of the Green.

I have created a Good Habit.

I flip the Hood and use a blower on the deck and the engine compartment after I finish mowing.