Anyone "Z" their frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIG_BLAZER86 · 06-27-2004, 08:22 PM

I need all the info I can get on this before I start it. Pictures would help alot. So if anyone has any ideas or sugestions I would realy like to hear them.

bouncytruck · 06-27-2004, 09:57 PM

Please educate me on what "Z"ing the frame means?

71swb4x4 · 06-27-2004, 10:38 PM

"Z"ing the frame is where you cut it, and then move it up and reweld it. You do it to lower the truck.

grnddwn · 06-28-2004, 12:58 AM

Check in the suspension section theres a couple of threads on z ing

*Gee_Emm* · 06-28-2004, 09:05 AM

Is that the same as a c section?

bouncytruck · 06-28-2004, 11:35 AM

Yeah, what's the difference between that and a "C" notch.

grnddwn · 06-29-2004, 11:21 PM

Z ing is when you cut your frame just past the firewall and move it up and reweld it

*chevytruckfan* · 06-30-2004, 11:10 AM

Here is what you are looking for.

And here is where I posted it last time.

06-27-2004, 08:22 PM	#1
BIG_BLAZER86 Registered User Join Date: Mar 2004 Location: SWANTON OHIO Posts: 114	Anyone "Z" their frame I need all the info I can get on this before I start it. Pictures would help alot. So if anyone has any ideas or sugestions I would realy like to hear them. __________________ 81 blazer 2wd tukin 30's 07 Jeep Grand Cherokee on 26's Tube chassis 5.3,dual T cases,54" boggers,steering rocks Dodge 3500 with some mods

06-27-2004, 09:57 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Please educate me on what "Z"ing the frame means? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

06-27-2004, 10:38 PM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	"Z"ing the frame is where you cut it, and then move it up and reweld it. You do it to lower the truck. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

06-28-2004, 11:35 AM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Yeah, what's the difference between that and a "C" notch. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

06-30-2004, 11:10 AM	#8
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	I wish people wouldn't ask the same ? over and over again Here is what you are looking for. And here is where I posted it last time.

06-28-2004, 12:58 AM	#4
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 694	Check in the suspension section theres a couple of threads on z ing

06-28-2004, 09:05 AM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Is that the same as a c section?

06-29-2004, 11:21 PM	#7
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 694	Z ing is when you cut your frame just past the firewall and move it up and reweld it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.