Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-04-2020, 07:52 AM | #1 |
Senior Member
Join Date: Apr 2003
Location: Elberton Ga.
Posts: 3,472
|
wanted to buy . e brake cables
looking for both rear parking brake cables for a 68 4x4 burb. they should measure approx 4ft. overall with about 2ft 9in. between the backing plate and the where the clip fastens them at the front.
|
09-04-2020, 12:47 PM | #2 |
Senior Member
Join Date: Jul 2009
Location: SoCal
Posts: 207
|
Re: wanted to buy . e brake cables
Hi Southern Parts,
In case you don't find what you are looking for on here, I made a contact out here on the west coast that does really good work and very economical from other places. In my situation, I installed a set of El Dorado brakes for the rear conversion but the ebrake cables were about 8" inches too short. I called one place back east and they wanted $80.00 a cable.... I then got ahold of Vic Mark at Control Cables in Los Angeles and got both at 60" inches for less than $100 with shipping included.. Mine were custom but he may haves yours in stock... Just a thought. Vic Control Cables Inc. 9816 Alburtis Ave. Santa Fe Springs, CA 90670 (562)949-0455 (562)949-0595 FAX
__________________
******************************************** In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks.. |
09-04-2020, 01:46 PM | #3 |
Senior Member
Join Date: Apr 2003
Location: Elberton Ga.
Posts: 3,472
|
Re: wanted to buy . e brake cables
Thanks for the info. I checked with inline tube but they didn't have what I needed.
|
09-04-2020, 03:46 PM | #4 |
Senior Member
Join Date: Apr 2003
Location: Elberton Ga.
Posts: 3,472
|
Re: wanted to buy . e brake cables
Thanks again for the info on the cables. $62 plus shipping for 2 new cables.
|
09-04-2020, 10:54 PM | #5 |
Senior Member
Join Date: Jul 2009
Location: SoCal
Posts: 207
|
Re: wanted to buy . e brake cables
Good for you... Hope everything works out.
__________________
******************************************** In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks.. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|