Inner Rocker Panel Bolts

[rowdy11]

Anyone have a part number or link for inner rocker panel bolts?
Thanks!

[ItWillBeSlow]

bump, i want to know too.

[bhemingson]

double bump,

[Jcfcamaro]

Bolts or nuts?

[ItWillBeSlow]

Originally Posted by Jcfcamaro

Bolts or nuts?

Both would be great.

[Jcfcamaro]

The nuts are a square nut that is spot welded on back at the cab corner section. 3/8-16. The bolts have a washer made on then with a pointed end. I found some on ebay when I converted my low hump floor to a high hump. They were 5/16 nuts and I spot welded them in place.There is a special name for the nuts but I don't remember.

[Jcfcamaro]

Picture. I also added the nuts under the floor to add bucket seats and made some custom floor braces.

[ItWillBeSlow]

I bought some home depot standard 3/16" nuts/bolts washers and have them in place for the time being. I originally wanted to use the factory style welded nut as shown in that photo, however I am not sure there is a real advantage to this for the A/B pillar application?

If you ever have to loosen these bolts, you're not adjusting the B pillar without having the rocker off anyway? Not sure if there is a pro or con to the A-pillar application. I didn't mean to hijack this thread, just wanted to confirm if there is a true advantage before hunting down those pieces. I hope this is still applicable to the OPs post!

Thanks!

[franken]

I usually put some in my pockets when at the pick a part...
https://www.google.com/search?client...=gm+body+bolts

[Jcfcamaro]

On mine I actually just welded regular nuts and have new bolts. I'm going to raptor line the underneath anyways,so you won't even tell anyways.

[rowdy11]

Thanks for the answers everyone!

[72c20customcamper]

The nuts I used are called square nuts got them at the local hardware store and just automotive body bolts again from my local hardware store

['68OrangeSunshine]

Originally Posted by Jcfcamaro

The nuts are a square nut that is spot welded on back at the cab corner section. 3/8-16. The bolts have a washer made on then with a pointed end. I found some on ebay when I converted my low hump floor to a high hump. They were 5/16 nuts and I spot welded them in place.There is a special name for the nuts but I don't remember.

Bolts =''Body Screws''.
Nuts = ''Weld Nuts''.
"J-Nuts" have a reach-around clip.
"Clip Nuts" have spring clips on 2 sides and are held in a place by spring tension. [Used on '67-'71s to attach the door panels.]