KS '67 GMC Gauge Cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 10-04-2020, 02:22 PM

MEMBER "projectking" PASSED VIA PM===STILL AVAILABLE

Pulled from a non-running '67 GMC 1/2 ton so can not verify all gauges work as they should but look very usable. Full seven gauge panel with all panel light sockets and printed circuit board intact. Circuit board is dated '67 on back. No chips or breaks on front of panel, some minor hair lines at lower mounting screws. I'm sure over zealous tightening at an install some time in the past. One small section at a screw mounting hole is broken out on back side but the metal tin was mounted solid to the carrier housing. Lens is intact, no crazing or cracks, good lettering and numbering. Cluster is dusty and could use a good cleaning and detailing . LIGHTS, WIPERS and CHOKE holes intact with no chips, white lettering needs a paint touch up.

$50 plus shipping, money order, do not have Paypal, Ask if you have questions or need more pics of certain areas.

**Ironhorse** · 10-04-2020, 02:25 PM

Last pics I have loaded in computer.

projectking · 10-04-2020, 02:58 PM

Gary, any rust on the gauge faces?

**Ironhorse** · 10-04-2020, 03:23 PM

No rust that I can see, the gauge faces look to have a good black color, there is what appears to be some dust in the smaller gauge faces but hard to tell for sure. That's why I mentioned it needed a good cleaning/detailing. If I were to detail it for my use I would likely blacken the speedometer and fuel gauge screws in the face. They can be seen but again does not look like rust. Not sure I can get better pics of the lower gauge faces. Hope that helps.

projectking · 10-04-2020, 03:39 PM

I’ll take it, shipped to 60462 please

**Ironhorse** · 10-04-2020, 04:15 PM

Quote:

Originally Posted by projectking

I’ll take it, shipped to 60462 please

SOLD to projectking. Thanks for the purchase. Will get back to you with an actual total shipped to 60462 zip.

**Ironhorse** · 10-05-2020, 08:59 PM

PM sent with payment info, thanks.

**Ironhorse** · 10-06-2020, 08:08 PM

Back up Top, still available after "projectking" passed.

**Ironhorse** · 10-09-2020, 07:06 PM

Still available, $50 plus shipping, nice driver quality 67 gauge cluster.

**michael bustamante** · 10-10-2020, 12:31 AM

I'll take it if it's still available

**Ironhorse** · 10-10-2020, 09:25 AM

Quote:

Originally Posted by michael bustamante

I'll take it if it's still available

Still available and SOLD to michael bustamante, payment pending. PM to follow with info. Thanks,

**Ironhorse** · 10-21-2020, 08:40 AM

Quote:

Originally Posted by michael bustamante

I'll take it if it's still available

Gauge cluster is still yours Michael, PM me when you are able. Good to have you back with us!

**Ironhorse** · 11-08-2020, 06:44 AM

A refresh and a back TTT for Michael Bustamante. You've been missed man, stay with us and Keep On Keepin' On.

10-04-2020, 02:22 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	'67 GMC Gauge Cluster MEMBER "projectking" PASSED VIA PM===STILL AVAILABLE Pulled from a non-running '67 GMC 1/2 ton so can not verify all gauges work as they should but look very usable. Full seven gauge panel with all panel light sockets and printed circuit board intact. Circuit board is dated '67 on back. No chips or breaks on front of panel, some minor hair lines at lower mounting screws. I'm sure over zealous tightening at an install some time in the past. One small section at a screw mounting hole is broken out on back side but the metal tin was mounted solid to the carrier housing. Lens is intact, no crazing or cracks, good lettering and numbering. Cluster is dusty and could use a good cleaning and detailing . LIGHTS, WIPERS and CHOKE holes intact with no chips, white lettering needs a paint touch up. $50 plus shipping, money order, do not have Paypal, Ask if you have questions or need more pics of certain areas. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 10-06-2020 at 08:02 PM. Reason: Member Passed On Purchase

10-04-2020, 02:25 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '67 GMC Gauge Cluster Last pics I have loaded in computer. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-04-2020, 02:58 PM	#3
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: '67 GMC Gauge Cluster Gary, any rust on the gauge faces? __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

10-04-2020, 03:23 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '67 GMC Gauge Cluster No rust that I can see, the gauge faces look to have a good black color, there is what appears to be some dust in the smaller gauge faces but hard to tell for sure. That's why I mentioned it needed a good cleaning/detailing. If I were to detail it for my use I would likely blacken the speedometer and fuel gauge screws in the face. They can be seen but again does not look like rust. Not sure I can get better pics of the lower gauge faces. Hope that helps. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-04-2020, 03:39 PM	#5
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: '67 GMC Gauge Cluster I’ll take it, shipped to 60462 please __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

10-05-2020, 08:59 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '67 GMC Gauge Cluster PM sent with payment info, thanks. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-06-2020, 08:08 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '67 GMC Gauge Cluster Back up Top, still available after "projectking" passed. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-09-2020, 07:06 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '67 GMC Gauge Cluster Still available, $50 plus shipping, nice driver quality 67 gauge cluster. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-10-2020, 12:31 AM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: '67 GMC Gauge Cluster I'll take it if it's still available __________________ 1967custom

11-08-2020, 06:44 AM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '67 GMC Gauge Cluster A refresh and a back TTT for Michael Bustamante. You've been missed man, stay with us and Keep On Keepin' On. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.