ID part please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lux · 11-08-2020, 05:58 PM

Just got all my parking brake cable assembly out to reinstall.
I can't figure out where the spring in the photo goes. Please help?

**jocko** · 11-08-2020, 07:01 PM

It's the self-adjust lever return spring - pic below for reference and orientation (from a C20, but same location/function on most brakes).

lux · 11-08-2020, 07:26 PM

Well,, thats a real head scratcher because I have not taken the drum brakes apart. Also I stored that spring with the parking brake cable.

Luvlegs · 11-08-2020, 07:43 PM

Bonus! THATs how we get the jug of spare parts we all have. Ha!

Warrens69GMC · 11-08-2020, 07:53 PM

That one looks bigger like the hood latch....

**jocko** · 11-08-2020, 11:37 PM

Quote:

Originally Posted by lux

Well,, thats a real head scratcher because I have not taken the drum brakes apart. Also I stored that spring with the parking brake cable.

So, is the SA return spring still present on your rear brakes? I only ask because it is very possible you removed the spring to get at the parking brake cable attach point when you removed the p-brake cables. If it's still there and you also have this extra spring, then I agree it's a head scratcher.

lux · 11-09-2020, 12:03 AM

Quote:

Originally Posted by jocko

So, is the SA return spring still present on your rear brakes? I only ask because it is very possible you removed the spring to get at the parking brake cable attach point when you removed the p-brake cables. If it's still there and you also have this extra spring, then I agree it's a head scratcher.

I have never had the drums off the axle. I assume the return spring is still there.

lux · 11-09-2020, 12:05 AM

Quote:

Originally Posted by Warrens69GMC

That one looks bigger like the hood latch....

It's definitly smaller than the hood latch. I should have put a ruler in the photo.

lux · 11-09-2020, 12:15 AM

New Photo

11-08-2020, 05:58 PM	#1
lux Registered User Join Date: Oct 2016 Location: Austin, Texas Posts: 306	ID part please Just got all my parking brake cable assembly out to reinstall. I can't figure out where the spring in the photo goes. Please help? Attached Images

11-08-2020, 07:01 PM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: ID part please It's the self-adjust lever return spring - pic below for reference and orientation (from a C20, but same location/function on most brakes). Attached Images

11-08-2020, 07:26 PM	#3
lux Registered User Join Date: Oct 2016 Location: Austin, Texas Posts: 306	Re: ID part please Well,, thats a real head scratcher because I have not taken the drum brakes apart. Also I stored that spring with the parking brake cable.

11-08-2020, 07:43 PM	#4
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: ID part please Bonus! THATs how we get the jug of spare parts we all have. Ha! __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

11-08-2020, 07:53 PM	#5
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,612	Re: ID part please That one looks bigger like the hood latch....

11-09-2020, 12:15 AM	#9
lux Registered User Join Date: Oct 2016 Location: Austin, Texas Posts: 306	Re: ID part please New Photo Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.