Anyone have pictures of a stock 74 454 with AC engine compartment? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hilljack · 07-06-2004, 01:11 PM

Trying to piece mine back together.

Thanks!

76HighSierra · 07-06-2004, 10:42 PM

Quote:

Originally Posted by hilljack

Trying to piece mine back together.

Thanks!

I have some pics of my '76 w/454 and A/C. It's a non-California emmisions truck and should be pretty close to yours. If you'll private message me your e-mail addy, I'll send them to you.

bagged74 · 07-06-2004, 10:52 PM

I can get ya some from a 79 if that'll help? let me know if you need em.

hilljack · 07-06-2004, 11:54 PM

Hey guys I'll gladly take any help I can get! Believe me I need all I can get

but I think it's coming together. 74 3/4 where smog exempt so the only thing it has is a PVC. I finally figured out the tabs on top of the valve cover are for wire harness and not spark plug looms. I'm not sure if my factory taped harness which ran along the intake will stretch over the valve cover. I think I just need to find the right cover.

dswancutt · 07-07-2004, 08:17 AM

If you get pictures of the spark plug looms, post them. I think they are the same as the small block, and if so, they are still available from GM.

Doug

hilljack · 07-07-2004, 10:59 AM

Quote:

Originally Posted by bagged74

I can get ya some from a 79 if that'll help? let me know if you need em.

That would be awseome

I should still be able to gain from it even though it's a few years newer. It's a pretty nice truck so I wanted to go with the factory wire loom and make it all stock, doesn't have to be pretty just right!

stepside454 · 07-07-2004, 01:08 PM

heres my 75 454 A/C

hilljack · 07-08-2004, 11:29 PM

You guys rock! I'm a busy bee putting all the goodies together. I'll post a picture when I have her stuft!

07-06-2004, 01:11 PM	#1
hilljack Registered User Join Date: Nov 2002 Posts: 27	Anyone have pictures of a stock 74 454 with AC engine compartment? Trying to piece mine back together. Thanks!

07-07-2004, 08:17 AM	#5
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Anyone have pictures of a stock 74 454 with AC engine compartment? If you get pictures of the spark plug looms, post them. I think they are the same as the small block, and if so, they are still available from GM. Doug

07-07-2004, 01:08 PM	#7
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	heres my 75 454 A/C Attached Images __________________ 75 GMC C-15 short/step factory 454, lowered

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-06-2004, 10:52 PM	#3
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	I can get ya some from a 79 if that'll help? let me know if you need em.

07-06-2004, 11:54 PM	#4
hilljack Registered User Join Date: Nov 2002 Posts: 27	Hey guys I'll gladly take any help I can get! Believe me I need all I can get but I think it's coming together. 74 3/4 where smog exempt so the only thing it has is a PVC. I finally figured out the tabs on top of the valve cover are for wire harness and not spark plug looms. I'm not sure if my factory taped harness which ran along the intake will stretch over the valve cover. I think I just need to find the right cover.

07-08-2004, 11:29 PM	#8
hilljack Registered User Join Date: Nov 2002 Posts: 27	You guys rock! I'm a busy bee putting all the goodies together. I'll post a picture when I have her stuft!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.