Looking for Eaton H110 info - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daveinluray · 12-28-2020, 08:35 AM

Hi

Looking for info on an Eaton H110 on a 72 c35 dump. Rated at 11k. Have a thread started over on the pickup forum but special K thought folks over here may be more familiar?
Currently have the carrier out. Pinion will be pulled once a socket arrives. I have torque values and backlash tolerances. I have found the pinion bearings are not tapered and wonder if this why there is not a preload listed in my manual?
thanks
Dave

12-28-2020, 08:35 AM	#1
daveinluray Registered User Join Date: Feb 2018 Location: Shenandoah Valley,Virginia Posts: 48	Looking for Eaton H110 info Hi Looking for info on an Eaton H110 on a 72 c35 dump. Rated at 11k. Have a thread started over on the pickup forum but special K thought folks over here may be more familiar? Currently have the carrier out. Pinion will be pulled once a socket arrives. I have torque values and backlash tolerances. I have found the pinion bearings are not tapered and wonder if this why there is not a preload listed in my manual? thanks Dave __________________ 1972 GMC 157" dump

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.