What year van tilt colums work in 67-72 truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Robo_bot* · 07-18-2004, 12:33 PM

hey guys i was wondering cause i just got a tilt for 16$ that i pulled from a junk yard in mint shape but its outta a 78 chevy Van i was wondering will it work for my truck 67 chevy LWB PS do i just have to move the neutral switch?

PanelDeland · 07-18-2004, 12:40 PM

I think you have to shorten it some too.Run a search on FAQ's and there should be a post on it.If not some of the vendors probably have one on their site.

neonlarry · 07-18-2004, 04:56 PM

Move the NS switch and shorten the intermediate shaft a couple of inches(collapse it into itself). you will also need a wiring harness adaptor to go from the horseshoe to flat plug (available from GM or board vendors for around $5).
Here is a post on moving the NS switch if you need some help:
http://67-72chevytrucks.com/vboard/s...threadid=63328

*Robo_bot* · 07-18-2004, 06:41 PM

are u talking about the horeshoe adapter on the colum or on the wiring harness inside the cab ??? cause i thought u had to adapt from the flat to the horeshoe?

Tx Firefighter · 07-18-2004, 08:26 PM

That's what he's talking about, the flat to curved adapter.

07-18-2004, 12:33 PM	#1
Robo_bot Account Suspended Join Date: Feb 2004 Location: Kelowna BC Canada Posts: 481	What year van tilt colums work in 67-72 truck? hey guys i was wondering cause i just got a tilt for 16$ that i pulled from a junk yard in mint shape but its outta a 78 chevy Van i was wondering will it work for my truck 67 chevy LWB PS do i just have to move the neutral switch?

07-18-2004, 12:40 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	I think you have to shorten it some too.Run a search on FAQ's and there should be a post on it.If not some of the vendors probably have one on their site. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

07-18-2004, 04:56 PM	#3
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Move the NS switch and shorten the intermediate shaft a couple of inches(collapse it into itself). you will also need a wiring harness adaptor to go from the horseshoe to flat plug (available from GM or board vendors for around $5). Here is a post on moving the NS switch if you need some help: http://67-72chevytrucks.com/vboard/s...threadid=63328 __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

07-18-2004, 08:26 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	That's what he's talking about, the flat to curved adapter. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-18-2004, 06:41 PM	#4
Robo_bot Account Suspended Join Date: Feb 2004 Location: Kelowna BC Canada Posts: 481	are u talking about the horeshoe adapter on the colum or on the wiring harness inside the cab ??? cause i thought u had to adapt from the flat to the horeshoe?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.