![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#18 | |
Senior Member
![]() Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project 1966 K20 adventure rig
Quote:
My kit did not come with the nuts for the large posts on the relays. It did come with the small nuts for the new 5 wire remote plug pigtail. The cable that goes from the relay pack to the F2 post on the motor was too short. I had to re-use the old one. The new relay pack mounting plate is different. The new one does not allow the positive battery lead to enter the relay pack from the back, like the old plate does. Now the positive lead has to come in over the top of the motor. So now there is about a foot difference in length between the negative and positive cables at the battery end. Does not come with new boots for the three post connections on the top of the motor. The boots on this winch are in great shape, so I was able to re-use them. Hope this was helpful.
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
|
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|