Wash your spring hangers (photos) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red450ih · 07-22-2004, 11:22 AM

I'm working on my 76/79 and found the rear spring hangers to be shot. They were overflowing with mud. The photos will show what I found after a good wash job. I bought new to me hangers at the junk yard from a wrecked 86, guess well see how easy they are to repalce.

http://albums.photo.epson.com/j/Albu...a=31337803&f=0

Keith

Jonboy · 07-22-2004, 12:14 PM

use grade 8 bolts in place of the rivets, and it will be pretty easy to replace.

07-22-2004, 11:22 AM	#1
red450ih Registered User Join Date: Mar 2001 Location: Nashville, Tennessee Posts: 225	Wash your spring hangers (photos) I'm working on my 76/79 and found the rear spring hangers to be shot. They were overflowing with mud. The photos will show what I found after a good wash job. I bought new to me hangers at the junk yard from a wrecked 86, guess well see how easy they are to repalce. http://albums.photo.epson.com/j/Albu...a=31337803&f=0 Keith __________________ GMC

07-22-2004, 12:14 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	use grade 8 bolts in place of the rivets, and it will be pretty easy to replace. __________________ 1974 Jimmy- 5.3/4L80e/NP241

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.