![]() |
|
|
|
|
#1 |
|
Registered User
Join Date: Nov 2018
Location: Ishpeming, mi
Posts: 660
|
Re: Gen V Question?
Thank you again Clint! That is exactly what I needed to know. I’ll be heading to the hardware store after work for that same setup. I like it!
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=780018 Jason’s 56 build |
|
|
|
|
|
#2 | |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,274
|
Re: Gen V Question?
Quote:
no prob, the offset it just a little wider than the water pump fittings, but only by a little if there installed that close like i have.... that site i linked is about as compact as you can get! Super clean to boot. to "machine down" the side T piece that gets soldered together, that you see smooth, I simply took a drill and a bolt with the head cut off that fit the ID nearly perfectly. I added tape to make it snug. chucked it up in the drill and spun it with a file resting on the ribs until it was the right size-ish. clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress Last edited by 87chevy.com; 12-17-2021 at 10:31 PM. |
|
|
|
|
|
|
#3 | |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,274
|
Re: Gen V Question?
Quote:
no prob, the offset it just a little wider than the water pump fittings, but only by a little if there installed that close like i have.... that site i linked is about as compact as you can get! Super clean to boot. clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|