New Gear Vendors Controller Wiring

[Sheepdip]

Originally Posted by conoco

Would you be able to show me what you used and how you hooked it up by chance. I am good with electrical as long as I am working on a established system. I was hoping to get more explanation on what relay you used and exactly how you wired it up. I currently have tied my power wire to the extra fuse location I have in my truck like the directions called for. However, that is also the source for the red wire on my distributor. I would like to use your set up if I can get you to explain to me the way it is set up! Thanks for sharing that!

I'll give it the old college try.

The delay relay is a Hella Brand.
Here's the wiring diagram also for it.

Your main power feed to the controller should be a fused 12ga wire directly from the battery going to connection 30. The 12 volt power feed to the controller will then come from connection 87...(87A is not used in this application).
Your keyed 12 volt from the ignition switch goes to connection 15
Connection 31 goes to a good ground

The timer on the relay is adjustable, mine are set at approx. 45 seconds after starting the vehicle the GV controller then powers up.

Hope I was of help.