Headlights don't work and it's not the dimmer swich.

[71gmcC15]

Originally Posted by jimijam00

$5 says its the switch

Looks like you owe me $5. Lol

[jimijam00]

Originally Posted by 71gmcC15

Looks like you owe me $5. Lol

Had you given us the info in post #17, that would have been the only other obvious failure point as a relay is also a switch.

So, is it fixed?

[71gmcC15]

Originally Posted by jimijam00

Had you given us the info in post #17, that would have been the only other obvious failure point as a relay is also a switch.

So, is it fixed?

Not yet. I'm going to completely buy pass thr HD harness. If that doent fix it then idk. But like I said I've had this issue before the hd harness was ever installed. I would just spam the dimmer and they would come back on Which leads me to believe it's not the problem. But I'll test on it when it not -8F with 30 mph winds.

[cheby267]

Pardon my ignorance , but what exactly are you referring to with the "HD Harness" ? Are you running HID headlights maybe ? Trying to wrap my mind around what your wiring setup is .

[71gmcC15]

Originally Posted by cheby267

Pardon my ignorance , but what exactly are you referring to with the "HD Harness" ? Are you running HID headlights maybe ? Trying to wrap my mind around what your wiring setup is .

No that's a solid question. I'm running the stock bulbs. The HD harness adds relays and takes the load off the dimmer and headlight swich running prower straight from the battery.

[jimijam00]

So the headlight relay harness upgrade. Something like https://www.lmctruck.com/1967-72-che...dlight-harness

[71gmcC15]

Originally Posted by jimijam00

So the headlight relay harness upgrade. Something like https://www.lmctruck.com/1967-72-che...dlight-harness

Yes. But mine actually works. The lmc one is wired wrong.

[71gmcC15]

Update. Got it fixed. No this sounds stupid and believe me it was the first thing I checked. But the fuse on the HD harness was bad. It didn't blow it just bad looked likea good fuse. Changed it and they work now. I feel so dumb now. Lol thanks everyone for helping me and my stupidity. But I was right it wasn't the dimmer. Lol

[davischevy]

Originally Posted by 71gmcC15

Update. Got it fixed. No this sounds stupid and believe me it was the first thing I checked. But the fuse on the HD harness was bad. It didn't blow it just bad looked likea good fuse. Changed it and they work now. I feel so dumb now. Lol thanks everyone for helping me and my stupidity. But I was right it wasn't the dimmer. Lol

We all have similar stories. We messed with a speed warning buzzer the other day for an hour. It had an inline fuse. The last thing we checked.

[Stocker]

Glad you got it fixed! You're not the first one to be fooled by a fuse's appearance....

[Steeveedee]

I worked as a mechanic for many years, and learned to not believe a good looking fuse. It only takes a couple of hours for that lesson to stick.

[jimijam00]

Originally Posted by 71gmcC15

Update. Got it fixed. No this sounds stupid and believe me it was the first thing I checked. But the fuse on the HD harness was bad. It didn't blow it just bad looked likea good fuse. Changed it and they work now. I feel so dumb now. Lol thanks everyone for helping me and my stupidity. But I was right it wasn't the dimmer. Lol

Don't give up that easy. Maybe the dimmer blew the fuse. Something blew the fuse, right?

[BigBird05]

You are so right Steeveedee. If its one thing you learn in electrical is don't assume anything and check everything. In the old days I had a circuit breaker I could put inline to replace the fuse.

[rockyrivermark]

Yep. Been there. I had good fuses on a ‘67 mercury restoration. Continuity when checking the fuse. Fuse holder was corroded slightly and didn’t send power out of it.
Again the cheap light 12 volt tester will find it.
Best $15 you will spend for electrical problems.

[71gmcC15]

Originally Posted by jimijam00

Don't give up that easy. Maybe the dimmer blew the fuse. Something blew the fuse, right?

I don't think the fuse actually blew. Mainly becuse like I said in the first post when the light whare working I switched to hi beam they whent out. Spamed the dimmer they came back on then hit it again then off. A blown fuse wouldn't of came back for one more round. I think the cheap fuse that was in it actually broke. It came out in peaces. Pulled just the plastic out first. Then one side of it then the other. If I have this happen again then I'll look deeper but for now I'm going to leave well enough alone.

[BigBird05]

A lot of junk china fuses are out there. When I go junk yarding I always buy some of the original GM fuses.

[Stocker]

We bought a new Honda Accord in 1979 and had it 4 years. Sometime in the early Eighties, it started acting up intermittently. You'd be driving normally and it would die, than before long everything was fine again. It had the old glass cartridge fuses, same as our trucks. Can't recall which circuit it was but one fuse was bad. It was very hard to see the fault, which was a hairline fracture of the filament. Most of the time the ends touched enough to make a connection. But once in awhile it would go open. Hard to pinpoint, easy to fix.