The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Welcome and Discussion > Welcome Area

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-13-2022, 11:22 AM   #1
69Penka
Registered User
 
Join Date: Feb 2022
Location: Hernandez, NM
Posts: 72
Hello from NM

Good morning and hello fro northern New Mexico! I have learned so much from all the postings and information I have found here on this website.

In August 2021 I bought a 69 3/4 ton 4x4 and i am slowly aquiring parts (original as much as I can) and replacing them to make it what I want. I have replaced the hood, both doors, seat, passenger side bedside, tailgate, replaced the cab and radiator mounting bushings, rebuilt the Q-jet and converted to HEI.and some of the wiring. I also rattle can primed to outside to make it all match till I can get a real paint job.

Next is to get the rockers, partial floor, cab supports and cab corners replaced, get rid of the idiot light guage cluster and replace with guages, replace the inner fenders, install the heater core I hade rebuilt, replace fuse block and wiring, install the interior components and then some paint. I'm sure theres more to list but one step at a time.

Anyway, I am so glad to have been approved and accepted on here and I have already met some cool people that are always willing to help. I hope I can pass it on to others also. Have a blessed day!😁

Having a hard time uploading pics. Will try again later....
Attached Images
     

Last edited by 69Penka; 03-13-2022 at 06:20 PM.
69Penka is offline   Reply With Quote
Old 03-13-2022, 12:11 PM   #2
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,449
Re: Hello from NM

Welcome to the board. I’m formerly from Albuquerque.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 03-13-2022, 12:12 PM   #3
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 8,429
Re: Hello from NM



Welcome to the forum.

About posting pictures this is what works for me.

Depending on your phone and/or computer there's different ways to upload pictures.

What I do is email the picture (one at a time, so its not so confusing) to my computer.
Then click on the picture in the e-mail and choose download.
Name the picture so you can find it in your computer.
If several, I write them on a post a note.
I normally Edit/crop the picture now.
That helps them not flip when you post them to the forum.
Now you are ready to upload picture.

So start your thread or comment to the thread.
Click on attachments (The Paper clip)
Then the pop-up screen will come up to (choose file).
Pick from the one (Or Ones) you just named.
Then once you get (one or all five) selected push the upload button.
Then when you click the attachment again, you can pick the pictures one at a time or all five at once.
Hope this helps.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)


http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is offline   Reply With Quote
Old 03-13-2022, 02:19 PM   #4
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: Hello from NM

Welcome to the forum.
The Rocknrod is offline   Reply With Quote
Old 03-13-2022, 02:42 PM   #5
69Penka
Registered User
 
Join Date: Feb 2022
Location: Hernandez, NM
Posts: 72
Re: Hello from NM

Thanks for the guidance Getter-Done. I will try on my PC. I was trying to upload them on my phone, plus I think the files might be too big.

Thanks for the welcome message DeadheadNM and the Rocknrod! I'm from the Espaņola area.

Last edited by 69Penka; 03-13-2022 at 03:49 PM.
69Penka is offline   Reply With Quote
Old 03-13-2022, 04:21 PM   #6
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,491
Re: Hello from NM

Welcome! Sounds like a good project.

Another possibility on the pictures issue is trying to upload more than one picture at a time. You can attach up to 5 pictures per post, but have to hit the upload button 5 times for that one post
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 03-16-2022, 05:04 AM   #7
LT7A
Registered User
 
Join Date: Oct 2015
Location: PNW
Posts: 3,627
Re: Hello from NM

You've done a lot of work already and it looks like it's coming together solid. Welcome!
LT7A is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com