MD 67 only Dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 08-19-2021, 01:24 PM

Will cut anywhere you want and ship. The edge around the windshield pinch weld is rotten as shown, everything else is good. Includes ash tray.

$125 plus shipping

SOLD
.

**richard2717** · 08-24-2021, 07:27 AM

I will cut out center section for $125 shipped as well

**richard2717** · 12-19-2021, 01:31 PM

ttt

**67km1590** · 03-17-2022, 09:53 AM

Is this dash still available?

**richard2717** · 03-17-2022, 09:55 AM

Quote:

Originally Posted by 67km1590

Is this dash still available?

Yes I still have it

**67km1590** · 03-17-2022, 10:35 AM

Would you take 125.00 shipped to 45103?

**richard2717** · 03-17-2022, 11:02 AM

Best I can do is $160 shipped. Shipping is a little over half of that. Because of box size I get hit with weight of 80lbs even though it only weighs in under 30.

If you only need the center section I can cut it behind the cluster and glove box as well as along the dash pad and ship is for $125. Cut would be similar to this one.

**67km1590** · 03-17-2022, 01:02 PM

That's a good possibility, do you think you could cut it an inch or more wider and still box it? I'd like to splice in straight areas. Also maybe cut the lower left corner somewhere in the hoop for the steering column, one less area to finish.
If so I'll take it.

**Grumpy old man** · 03-17-2022, 01:53 PM

67km1590 ask if he can cut it like this red section in the picture . It's worth an extra shipping charge to work it this way . Then you can just drill the couple spot welds on the bottom and not have to cut the support thats already in your dash and you end up with a lot less body work .

**richard2717** · 03-17-2022, 02:01 PM

I can cut it to the dimensions inside the white tape as shown without extra shipping charges. If you want it, my PP link is below in my signature. Thanks

**67km1590** · 03-17-2022, 02:43 PM

Thank you Grumpy old man, thats exactly what I had in mind. I'm new and haven't got around to posting photos yet.
And yes richard 2717 that cut is fine. I'll send you 125.00 to your paypal acct in few minutes and PM you my address. Thank you for the response.

**richard2717** · 03-17-2022, 04:00 PM

Cut, boxed and labeled for tomorrow pickup. Thanks

**67km1590** · 03-17-2022, 04:24 PM

That was fast, I like how you do things. Thanks

FRCvette · 03-17-2022, 10:21 PM

Quote:

Originally Posted by 67km1590

Would you take 125.00 shipped to 45103?

Since the deal is done I will post that I live in 45103 zip also. Batavia area near county jail.

**67km1590** · 03-18-2022, 08:06 AM

Quote:

Originally Posted by FRCvette

Since the deal is done I will post that I live in 45103 zip also. Batavia area near county jail.

Would you happen to have the sharp light green (maybe 503) 67 short step I'ves seen around? We have a heavy truck and equipment repair business in Batavia. I'd like to see your truck up close sometime.

**Grumpy old man** · 03-18-2022, 08:41 AM

Here is what using the dash section cut and installed this way looks like when done , it's really the best way to repair radio cut out damage . without a ton of body work .

**67km1590** · 03-18-2022, 09:06 AM

That's what I'm after. I had a cut out from a 69 dash and got in welded in but what a mess, I would never make it look like I wanted. Also at the time I was new to all the differences in 67's and of course the ignition switch and lighter holes were wrong. I got back around to looking at it more and thought why would I splice it in where the cuts were so visible and hard to finish.

**67km1590** · 03-22-2022, 01:16 PM

Quote:

Originally Posted by richard2717

Cut, boxed and labeled for tomorrow pickup. Thanks

Received dash panel today in perfect condition, Thanks

08-19-2021, 01:24 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,137	67 only Dash Will cut anywhere you want and ship. The edge around the windshield pinch weld is rotten as shown, everything else is good. Includes ash tray. $125 plus shipping SOLD . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 03-17-2022 at 04:01 PM.

08-24-2021, 07:27 AM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,137	Re: 67 only Dash I will cut out center section for $125 shipped as well __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-19-2021, 01:31 PM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,137	Re: 67 only Dash ttt __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-17-2022, 09:53 AM	#4
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 78	Re: 67 only Dash Is this dash still available?

03-17-2022, 10:35 AM	#6
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 78	Re: 67 only Dash Would you take 125.00 shipped to 45103?

03-17-2022, 11:02 AM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,137	Re: 67 only Dash Best I can do is $160 shipped. Shipping is a little over half of that. Because of box size I get hit with weight of 80lbs even though it only weighs in under 30. If you only need the center section I can cut it behind the cluster and glove box as well as along the dash pad and ship is for $125. Cut would be similar to this one. Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-17-2022, 01:02 PM	#8
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 78	Re: 67 only Dash That's a good possibility, do you think you could cut it an inch or more wider and still box it? I'd like to splice in straight areas. Also maybe cut the lower left corner somewhere in the hoop for the steering column, one less area to finish. If so I'll take it.

03-17-2022, 01:53 PM	#9
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 67 only Dash 67km1590 ask if he can cut it like this red section in the picture . It's worth an extra shipping charge to work it this way . Then you can just drill the couple spot welds on the bottom and not have to cut the support thats already in your dash and you end up with a lot less body work . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

03-17-2022, 02:01 PM	#10
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,137	Re: 67 only Dash I can cut it to the dimensions inside the white tape as shown without extra shipping charges. If you want it, my PP link is below in my signature. Thanks Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-17-2022, 02:43 PM	#11
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 78	Re: 67 only Dash Thank you Grumpy old man, thats exactly what I had in mind. I'm new and haven't got around to posting photos yet. And yes richard 2717 that cut is fine. I'll send you 125.00 to your paypal acct in few minutes and PM you my address. Thank you for the response.

03-17-2022, 04:00 PM	#12
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,137	Re: 67 only Dash Cut, boxed and labeled for tomorrow pickup. Thanks Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-17-2022, 04:24 PM	#13
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 78	Re: 67 only Dash That was fast, I like how you do things. Thanks

03-18-2022, 08:41 AM	#16
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 67 only Dash Here is what using the dash section cut and installed this way looks like when done , it's really the best way to repair radio cut out damage . without a ton of body work . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

03-18-2022, 09:06 AM	#17
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 78	Re: 67 only Dash That's what I'm after. I had a cut out from a 69 dash and got in welded in but what a mess, I would never make it look like I wanted. Also at the time I was new to all the differences in 67's and of course the ignition switch and lighter holes were wrong. I got back around to looking at it more and thought why would I splice it in where the cuts were so visible and hard to finish.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.