55.2-59 My’56 Chevy Shortbox Build

[dsraven]

Check out some images on some 4x4 sites. They are pretty good at doing stuff like that.
You could maybe use a welders series 4link axle bracket, modified to exclude the shock mount, and welded upside down on the tube near the cast center section on each side. Then go forward from there to the frame mount in the middle. Or go 4 link with a panhard bar behind the axle.

[SARBlade]

Originally Posted by dsraven

Check out some images on some 4x4 sites. They are pretty good at doing stuff like that.
You could maybe use a welders series 4link axle bracket, modified to exclude the shock mount, and welded upside down on the tube near the cast center section on each side. Then go forward from there to the frame mount in the middle. Or go 4 link with a panhard bar behind the axle.

Thanks, I'll go check that out, I was trying hard to stay away from the panhard, I bought the triangulated 4 link setup before thinking about the cast diff, grrrr.