TX WTB- Correct 67 ign. spacer and bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 07-16-2022, 07:51 PM

as the title says. been fighting with mine and even trimmed the ignition switch down some, just don't think it's the right one!

please let me know if you have one

**daddymoo2** · 07-16-2022, 08:12 PM

I think I have what you are looking for. I will post pics shortly. Don

**daddymoo2** · 07-16-2022, 08:58 PM

This what I have. Don

**kev2809** · 07-16-2022, 09:05 PM

the spacer looks similar but the trim ring definitely isn't what I have. I'll take them both.

**daddymoo2** · 07-16-2022, 09:15 PM

PM Sent. Don

**Jeff's bowtie's** · 07-17-2022, 04:59 PM

I have both the original spacer with the correct bezel for a 67 chevy truck if daddymoo2’s doesn’t work for you $40.00 shipped conus plus PayPal fees thanks

**kev2809** · 07-17-2022, 05:02 PM

thanks Jeff but Don is sending me one

are those 2 different trim rings?

**Jeff's bowtie's** · 07-17-2022, 05:48 PM

Same trim ring just back and front pics

**kev2809** · 07-17-2022, 07:28 PM

I meant between yours and dons

**Jeff's bowtie's** · 07-17-2022, 07:40 PM

Mine is different from Dons I’m not sure what his is off of but the one I have is definitely off a 67 chevy truck

**kev2809** · 07-17-2022, 07:43 PM

this is the one I have

**daddymoo2** · 07-17-2022, 08:13 PM

Kevin, Sorry I made a mistake on the chrome bezel. Will refund payment ASAP. Jeff’s parts look correct. Sorry Don

**kev2809** · 07-17-2022, 08:37 PM

no problem thanks Don.

sending a pm jeff

**Jeff's bowtie's** · 07-18-2022, 07:23 AM

Pm returned with payment info thanks!!

**kev2809** · 07-20-2022, 02:24 PM

received today!

damn Jeff, had me nervous to open it at first!

**Jeff's bowtie's** · 07-20-2022, 04:17 PM

Glad you got it!! Safe shipping container lol!!😂

**kev2809** · 07-20-2022, 05:02 PM

lol

thanks again!

07-16-2022, 07:51 PM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	WTB- Correct 67 ign. spacer and bezel as the title says. been fighting with mine and even trimmed the ignition switch down some, just don't think it's the right one! please let me know if you have one __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-16-2022, 08:12 PM	#2
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,593	Re: WTB- Correct 67 ign. spacer and bezel I think I have what you are looking for. I will post pics shortly. Don

07-16-2022, 08:58 PM	#3
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,593	Re: WTB- Correct 67 ign. spacer and bezel This what I have. Don Attached Images

07-16-2022, 09:05 PM	#4
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: WTB- Correct 67 ign. spacer and bezel the spacer looks similar but the trim ring definitely isn't what I have. I'll take them both. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-16-2022, 09:15 PM	#5
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,593	Re: WTB- Correct 67 ign. spacer and bezel PM Sent. Don

07-17-2022, 04:59 PM	#6
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB- Correct 67 ign. spacer and bezel I have both the original spacer with the correct bezel for a 67 chevy truck if daddymoo2’s doesn’t work for you $40.00 shipped conus plus PayPal fees thanks Attached Images

07-17-2022, 05:02 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: WTB- Correct 67 ign. spacer and bezel thanks Jeff but Don is sending me one are those 2 different trim rings? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-17-2022, 05:48 PM	#8
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB- Correct 67 ign. spacer and bezel Same trim ring just back and front pics

07-17-2022, 07:28 PM	#9
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: WTB- Correct 67 ign. spacer and bezel I meant between yours and dons __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-17-2022, 07:40 PM	#10
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB- Correct 67 ign. spacer and bezel Mine is different from Dons I’m not sure what his is off of but the one I have is definitely off a 67 chevy truck

07-17-2022, 07:43 PM	#11
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: WTB- Correct 67 ign. spacer and bezel this is the one I have Attached Images __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-17-2022, 08:13 PM	#12
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,593	Re: WTB- Correct 67 ign. spacer and bezel Kevin, Sorry I made a mistake on the chrome bezel. Will refund payment ASAP. Jeff’s parts look correct. Sorry Don

07-17-2022, 08:37 PM	#13
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: WTB- Correct 67 ign. spacer and bezel no problem thanks Don. sending a pm jeff __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-18-2022, 07:23 AM	#14
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB- Correct 67 ign. spacer and bezel Pm returned with payment info thanks!!

07-20-2022, 02:24 PM	#15
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: WTB- Correct 67 ign. spacer and bezel received today! damn Jeff, had me nervous to open it at first! Attached Images __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

07-20-2022, 04:17 PM	#16
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB- Correct 67 ign. spacer and bezel Glad you got it!! Safe shipping container lol!!😂

07-20-2022, 05:02 PM	#17
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: WTB- Correct 67 ign. spacer and bezel lol thanks again! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.