MI 1969 c60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Pvmt-Pndr** · 08-23-2021, 04:45 PM

1969 Chevrolet big fender C60, 427 gas, 5 speed trans, 2 speed rear end. 70% rewired and have the other 30%, haven't put on, all wiring cane from M+H electrical fabricators. Air brakes in great shape. I eplaced all the gaskets, stainless block hugger headers, 2-1/2" dual exhaust with an H-pipe, plugs, wires, HEI distributor, AVS2 carb, intellitronix gauge cluster (POS), had the clutch rebuilt by Detroit Clutch Masters, installed a new starter ring gear, new starter, 4 new retreads on the rear, 2 new steer tires, all 6 rims are new 22.5 (tubeless), recon led cab lights, fuel filter, interior has sound deadening and new rubber floor mat, 50 gallon saddle tank plus the factory 16-18 gallon in the cab. Comes with a set of 5:29 gears, not installed. Will cruise at 60 mph all day long with its current gears.

There's plenty more I can't remember right now, will add as I think of more.

I don't have enough time to enjoy the truck with my work schedule. $9,500 obo. Located in south east Michigan.

Feel free to ask any questions. I can take more pictures if needed .

**57NAPCO** · 08-24-2021, 02:30 AM

Cool truck, GLWS

**Rods** · 08-24-2021, 08:59 AM

Flip for you

**Pvmt-Pndr** · 08-24-2021, 10:28 AM

Thank you Rods! Much better.

**Pvmt-Pndr** · 09-14-2021, 04:15 PM

$8,500

**Pvmt-Pndr** · 03-12-2022, 09:57 PM

I forgot I posted it... $6500

**57NAPCO** · 03-13-2022, 08:56 AM

Any idea how many miles are on it?

**Pvmt-Pndr** · 03-13-2022, 09:37 AM

I took a picture of the original dash before I changed it to an intellitronix dash and it shows 80,484 miles.

**special-K** · 03-19-2022, 10:00 PM

Is the 427 original? Was the hood swapped?

**Pvmt-Pndr** · 03-20-2022, 09:19 AM

The build sticker inside the dash says it originally came with a 427. The current 427 is not the original one, the original motor had a lot of problems.

I pulled the original motor and installed another 427TD with great compression and still has the original cross hatches from the machining. I replaced all the gaskets in the new motor from the pan to the carb preventably. Not a single leak from the motor.

**Pvmt-Pndr** · 03-20-2022, 09:23 AM

I cannot tell you if the hood is original to the truck or not. I have not changed anything on the body since I've owned it. I know it does not have the 427 emblems.

**special-K** · 03-21-2022, 10:25 AM

Thanks for the answers. Another nice one I'll have to watch go on by.

**Pvmt-Pndr** · 08-14-2022, 08:34 AM

$6k

**Pvmt-Pndr** · 08-18-2022, 07:14 AM

Sold.....

08-23-2021, 04:45 PM	#1
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	1969 c60 1969 Chevrolet big fender C60, 427 gas, 5 speed trans, 2 speed rear end. 70% rewired and have the other 30%, haven't put on, all wiring cane from M+H electrical fabricators. Air brakes in great shape. I eplaced all the gaskets, stainless block hugger headers, 2-1/2" dual exhaust with an H-pipe, plugs, wires, HEI distributor, AVS2 carb, intellitronix gauge cluster (POS), had the clutch rebuilt by Detroit Clutch Masters, installed a new starter ring gear, new starter, 4 new retreads on the rear, 2 new steer tires, all 6 rims are new 22.5 (tubeless), recon led cab lights, fuel filter, interior has sound deadening and new rubber floor mat, 50 gallon saddle tank plus the factory 16-18 gallon in the cab. Comes with a set of 5:29 gears, not installed. Will cruise at 60 mph all day long with its current gears. There's plenty more I can't remember right now, will add as I think of more. I don't have enough time to enjoy the truck with my work schedule. $9,500 obo. Located in south east Michigan. Feel free to ask any questions. I can take more pictures if needed . Attached Images

08-24-2021, 02:30 AM	#2
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,234	Re: 1969 c60 Cool truck, GLWS

08-24-2021, 08:59 AM	#3
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,487	Re: 1969 c60 Flip for you Attached Images __________________ Az

08-24-2021, 10:28 AM	#4
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 Thank you Rods! Much better.

09-14-2021, 04:15 PM	#5
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 $8,500

03-12-2022, 09:57 PM	#6
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 I forgot I posted it... $6500

03-13-2022, 08:56 AM	#7
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,234	Re: 1969 c60 Any idea how many miles are on it?

03-13-2022, 09:37 AM	#8
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 I took a picture of the original dash before I changed it to an intellitronix dash and it shows 80,484 miles.

03-19-2022, 10:00 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1969 c60 Is the 427 original? Was the hood swapped? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-20-2022, 09:19 AM	#10
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 The build sticker inside the dash says it originally came with a 427. The current 427 is not the original one, the original motor had a lot of problems. I pulled the original motor and installed another 427TD with great compression and still has the original cross hatches from the machining. I replaced all the gaskets in the new motor from the pan to the carb preventably. Not a single leak from the motor.

03-20-2022, 09:23 AM	#11
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 I cannot tell you if the hood is original to the truck or not. I have not changed anything on the body since I've owned it. I know it does not have the 427 emblems.

03-21-2022, 10:25 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1969 c60 Thanks for the answers. Another nice one I'll have to watch go on by. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-14-2022, 08:34 AM	#13
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 $6k

08-18-2022, 07:14 AM	#14
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 Sold.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.