|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-04-2004, 01:45 AM
|
#1 |
|
Registered User
Join Date: Aug 2004
Location: SW Washington
Posts: 947
|
Relocating/Adding New Gas Tank???
I was wondering about any options on my 72, I dont like they look of the fillerneck and gas cap sticking out, i dont wanna go with a fuel cell in the bed though. Anyone who has done this or have any ideas? Thanx alot
__________________
72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done... |
|
|
|
08-04-2004, 01:52 AM
|
#2 |
|
Registered User
Join Date: Jan 2003
Location: Emmett, Idaho
Posts: 858
|
Take a look at this link, "jorgensensc" has a lot of good information on moving the tank
http://67-72chevytrucks.com/vboard/s...light=gas+tank
__________________
Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" Last edited by ljbear; 08-04-2004 at 01:54 AM. |
|
|
|
|
08-04-2004, 01:00 PM
|
#3 |
|
Registered User
Join Date: Mar 2001
Location: Raeford, NC.
Posts: 34
|
what I did
I have a 1970 C/10 short box with a trail arm suspension. I put a 72 Blazer gas tank in the frame rails. All I had to do is cut the frame back a bit. I will not be towing with the truck. For the fill neck I used the inside cover and fill neck from the same Blazer. I cut a hole in the inside of the box thru the floor and thru the top of the fill nech. Then cut the fill neck in half, rotate and reweld it. It fits in the box perfict and all I have to do is open the tail gate and fill from the inside. Leaving me a totally smooth truck.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
