New project : 72 Suburban

[KFF 1]

Cut around the seal to remove the trim and afterwards removed the windshield

[KFF 1]

This is the top corner on the passenger side and is the worst spot that I will have to repair

[KFF 1]

The driver side corners and passenger bottom corner are decent so Im going to clean the seam sealer out and reseal all of the seams top and bottom now that i have total access to them with the windshield out

[KFF 1]

PO had painted the dashboard flat black and over time it has peeled off and the red is showing in spots, so now I can repaint it so it will be correct and will look much better. I scuffed the black off down to the original red just to get a jump on prep for paint

[BAD1916]

Seems crazy to me that the top would rust like that. I would have expected the bottom to go before the top.

[KFF 1]

Originally Posted by BAD1916

Seems crazy to me that the top would rust like that. I would have expected the bottom to go before the top.

Yes sir, I thought the same thing.

[KFF 1]

Today I disassembled the " no door " on the Suburban to installed the new weather stripping and felt. Planning to assemble the "no door" tomorrow so that will be one thing off the winter project list.