Dual Pass Radiator for my 68

[GMJimmy]

Presently I have a standard aluminum rad in my 68 C10. I have an LS engine in it and because of the waterpump outlet position (Same as 2006-07 1500) I have that super long rad hose extending from the pump on the passenger side all the way over to the drivers side rad inlet. I also had some issues with the trans cooler fittings and decided to put a dual pass rad in. Does anyone know of a manufacturer of a dual pass direct fit rad for my truck?
Thanks for any suggestions.
Jim

[Jason Banks]

I have one of these:
https://www.ebay.com/itm/352233489480

It was cheap, there are other more expensive ones out there.

[LS short box]

I don't have a part number but I used an Afco dual pass on my 68 LS swapped. Biggest I could fit. Got it from Speedway Motors. I had to weld in a bung for the coolant line.
Here's a pic.

[GMJimmy]

Originally Posted by Jason Banks

I have one of these:
https://www.ebay.com/itm/352233489480

It was cheap, there are other more expensive ones out there.

I'll check it out thanks!

Originally Posted by LS short box

I don't have a part number but I used an Afco dual pass on my 68 LS swapped. Biggest I could fit. Got it from Speedway Motors. I had to weld in a bung for the coolant line.
Here's a pic.

I'll check out Afco as well thanks!