67-72 4x4 LS swap crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Tomo** · 03-03-2023, 03:37 PM

Are these the only 2 options?

https://www.ecautoandironfabrication...ap-crossmember

https://www.dirtydingo.com/shop/mobi...oducts_id=1408

**Tomo** · 03-03-2023, 06:38 PM

According to this post there is another option.

http://67-72chevytrucks.com/vboard/s...9&postcount=74

This is an old thread has anyone done this more recently? Pictures would be great!

**Tomo** · 03-03-2023, 06:43 PM

Here’s another option.

https://diy4x.com/product.php?produc...cat=252&page=1

**Richard** · 03-04-2023, 05:03 AM

Quote:

Originally Posted by Tomo

Here’s another option.

https://diy4x.com/product.php?produc...cat=252&page=1

This one is nice. I like the removable lower section. Think it is designed for the original motors though. Using with an LS may require adapters and more fabrication. If i would have seen it would have used it over the Pacific Fab member I have in my truck. Would make a few changes as I have the tools.

The ECAuto crossmember is the Pacific fab crossmember used in my truck, just not powder coated. Not a fan of the Dirty Dingo crossmember myself. Though many are good with it.

That Jegs crossmember is interesting. While $100 now it would be a good starting point for an engine mount. More fabrication than others but doable for me.

**Tomo** · 03-04-2023, 07:47 AM

Quote:

Originally Posted by Richard

This one is nice. I like the removable lower section. Think it is designed for the original motors though. Using with an LS may require adapters and more fabrication. If i would have seen it would have used it over the Pacific Fab member I have in my truck. Would make a few changes as I have the tools.

The ECAuto crossmember is the Pacific fab crossmember used in my truck, just not powder coated. Not a fan of the Dirty Dingo crossmember myself. Though many are good with it.

That Jegs crossmember is interesting. While $100 now it would be a good starting point for an engine mount. More fabrication than others but doable for me.

Richard, my assessment is the same. I emailed diy4x for some more info - hopeful they can make it work for the ls.

**Tomo** · 03-04-2023, 08:10 AM

Also I want my k5 at stock height. So my only options are dirty dingo or make my own.

**Tomo** · 03-04-2023, 10:20 PM

1 more option. Rtech, they sell a trans mount too.

https://rtechfabrications.com/produc...e-crossmember/

03-03-2023, 03:37 PM	#1
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 213	67-72 4x4 LS swap crossmember Are these the only 2 options? https://www.ecautoandironfabrication...ap-crossmember https://www.dirtydingo.com/shop/mobi...oducts_id=1408

03-03-2023, 06:38 PM	#2
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 213	Re: 67-72 4x4 LS swap crossmember According to this post there is another option. http://67-72chevytrucks.com/vboard/s...9&postcount=74 This is an old thread has anyone done this more recently? Pictures would be great!

03-03-2023, 06:43 PM	#3
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 213	Re: 67-72 4x4 LS swap crossmember Here’s another option. https://diy4x.com/product.php?produc...cat=252&page=1

03-04-2023, 08:10 AM	#6
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 213	Re: 67-72 4x4 LS swap crossmember Also I want my k5 at stock height. So my only options are dirty dingo or make my own.

03-04-2023, 10:20 PM	#7
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 213	Re: 67-72 4x4 LS swap crossmember 1 more option. Rtech, they sell a trans mount too. https://rtechfabrications.com/produc...e-crossmember/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.