Energy Suspension Body Mount Kit, Missing a Mount?

[D-n-Tyke]

Those of you that have replaced their body mounts using the Energy Suspension kit (Kit 3.4149G) what did you do about it missing one of the body mounts? The kit comes with 6 mounts per side, while my Suburban has 7 per side. It is missing one of the mounts under the "bed" area in the back. 3rd mount from the rear. What is the solution to this?

1969 C20 Suburban

[kev2809]

i used that kit and don't remember having any missing? actually, when i redid my raised floor in the back, i couldnt use one of the stock locations (never fabricated a mount there)...so i actually have one set left i did not use. i can take pictures of the one i have left over. i also didnt use the radiator ones as i already replaced those with LMC ones a while back.

if you want them they are yours, just cover the shipping?

[kev2809]

here's what's left. the bolts on the mounts are about 5 1/2" long

[D-n-Tyke]

Originally Posted by kev2809

here's what's left. the bolts on the mounts are about 5 1/2" long

Yep. That's the one I need. PM me know how to get you payment. Hopefully they will fit in a small flat rate box. Shipping would be to 92021. I can PM the address when you are ready.

[D-n-Tyke]

Originally Posted by kev2809

i used that kit and don't remember having any missing? actually, when i redid my raised floor in the back, i couldnt use one of the stock locations (never fabricated a mount there)...so i actually have one set left i did not use. i can take pictures of the one i have left over. i also didnt use the radiator ones as i already replaced those with LMC ones a while back.

if you want them they are yours, just cover the shipping?

Just for my curiousity would you mind (no hurry, just when you have a free minute) counting how many body mounts you actually have on your suburban. I have (1) core support, (1) front of cab, (1) under cab, behind frt seat, (1) back of "cab" behind 2nd row seat, (2) under the cargo area (1 mid wheel well, 1 by spare tire well) and (1) at the rear of the body, for a total of 7 mounts per side.

[kev2809]

hmm that's weird. I don't have a #5 BUT, my truck is step notched for the air ride. I did it maybe 13 years ago and I don't remember at all if there was one there. if it was one there, then my kit would've been short too

[kev2809]

truck is covered because of the rain but if you look towards the back you can #4, then about a foot behind it is the step notch. I'm guessing that's where #5 goes?

[D-n-Tyke]

Originally Posted by kev2809

hmm that's weird. I don't have a #5 BUT, my truck is step notched for the air ride. I did it maybe 13 years ago and I don't remember at all if there was one there. if it was one there, then my kit would've been short too

Yeah, in order to put my CPP C-notch kit I had to take the moubt bracket off. I want to put it back on after I finish this C-notch install. Hense why I need that mount.

Let me know how much the shipping is and how to get payment to you. Appreciate you helping me out with this.

[kev2809]

Originally Posted by D-n-Tyke

Yeah, in order to put my CPP C-notch kit I had to take the moubt bracket off. I want to put it back on after I finish this C-notch install. Hense why I need that mount.

Let me know how much the shipping is and how to get payment to you. Appreciate you helping me out with this.

pm sent