DURG's Black 65 C10 - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DURG · 12-30-2017, 09:38 PM

It had some cracks. I used two part epoxy.

DURG · 12-30-2017, 09:40 PM

Quote:

Originally Posted by gringoloco

I dig the air cleaner, maybe clean up the holes with a dimple die?

They would have to face out as the air cleaner is right against the housing. I don't think that would look good. And I don't have dimple dies LOL.

DURG · 12-30-2017, 09:42 PM

Quote:

Originally Posted by northern 85

I like it!!! Is there a way you could put a flare on the end of the snorkel?

I tried a little with a ball peen. I need to use it against a dolly. The snorkel metal is pretty thin but it had a flare originally, so I'm sure it can be done.

DURG · 12-30-2017, 09:46 PM

I put another hole between the writing and the snorkel today. Also installed the water outlet wand a coolant bypass hose. Started mounting a coolant overflow bottle. Measured up and ordered battery cables. Ordered 2 Auto meter pro lite 2-1/16"gauges which I am going to mount in the vertical rectangular spot on the dash.

gringoloco · 12-31-2017, 01:22 AM

Keep plugging away

Glad to see you back on this, it was part of my inspiration to go with PB coilovers on my junk

northern 85 · 12-31-2017, 09:32 AM

Hopefully i can come see it in person this summer!!!!

DURG · 05-14-2018, 09:05 PM

Brakes done except bleeding. Added coolant. Scraping old windshield sealnt off channel. Cut holes for gages. Cut the four corner wood pieces for the bedwood.Really need to charge into replacing the entire wiring harness soon.

aggie91 · 05-15-2018, 11:05 AM

glad to see you are still at it. seems like life can get in the way of making progress on a project...

made2drag · 05-23-2018, 05:43 PM

Love it!

DURG · 06-10-2018, 08:55 PM

Couple pieces of wood fitted to the wide wheel well.

northern 85 · 06-12-2018, 05:16 AM

Looks great!!!

timmytimm3 · 06-13-2018, 09:16 AM

Keep at it man!

DURG · 06-22-2018, 03:35 PM

Quote:

Originally Posted by timmytimm3

Keep at it man!

Wood cut and routered. Test piece stained and varnished.
Posted via Mobile Device

DURG · 06-23-2018, 08:46 PM

DURG · 06-23-2018, 08:49 PM

Wood stained and 2 coats of semi gloss marine varnish. Tranny cooler lines done. I think the wood will look good with the unpolished stainless strips and stainless carriage bolts.

gringoloco · 06-25-2018, 12:36 AM

Agreed. Gonna be a very nice, but subtle look

likaroc13 · 06-25-2018, 04:27 PM

Looking good!

northern 85 · 07-07-2018, 07:28 AM

NICE!!!! When can i test drive it??

DURG · 08-13-2023, 09:53 PM

5 year update LOL. Fired up the truck finally. 385 fast burn GM crate motor. I had been dreading installing all new wiring and finally started so I could get this thing running. Using American Autowire kit like I did on my 62 Impala.

12-30-2017, 09:38 PM	#401
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 It had some cracks. I used two part epoxy. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

12-30-2017, 09:46 PM	#404
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 I put another hole between the writing and the snorkel today. Also installed the water outlet wand a coolant bypass hose. Started mounting a coolant overflow bottle. Measured up and ordered battery cables. Ordered 2 Auto meter pro lite 2-1/16"gauges which I am going to mount in the vertical rectangular spot on the dash. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

12-31-2017, 01:22 AM	#405
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: DURG's Black 65 C10 Keep plugging away Glad to see you back on this, it was part of my inspiration to go with PB coilovers on my junk __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-31-2017, 09:32 AM	#406
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 Hopefully i can come see it in person this summer!!!!

05-14-2018, 09:05 PM	#407
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Brakes done except bleeding. Added coolant. Scraping old windshield sealnt off channel. Cut holes for gages. Cut the four corner wood pieces for the bedwood.Really need to charge into replacing the entire wiring harness soon. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

05-15-2018, 11:05 AM	#408
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: DURG's Black 65 C10 glad to see you are still at it. seems like life can get in the way of making progress on a project... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

05-23-2018, 05:43 PM	#409
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: DURG's Black 65 C10 Love it! __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

06-10-2018, 08:55 PM	#410
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Couple pieces of wood fitted to the wide wheel well. Attached Images __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

06-12-2018, 05:16 AM	#411
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 Looks great!!!

06-13-2018, 09:16 AM	#412
timmytimm3 Registered User Join Date: Apr 2012 Location: CT Posts: 265	Re: DURG's Black 65 C10 Keep at it man! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad

06-23-2018, 08:46 PM	#414
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

06-23-2018, 08:49 PM	#415
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Wood stained and 2 coats of semi gloss marine varnish. Tranny cooler lines done. I think the wood will look good with the unpolished stainless strips and stainless carriage bolts. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

06-25-2018, 12:36 AM	#416
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: DURG's Black 65 C10 Agreed. Gonna be a very nice, but subtle look __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

06-25-2018, 04:27 PM	#417
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: DURG's Black 65 C10 Looking good! __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

07-07-2018, 07:28 AM	#418
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 NICE!!!! When can i test drive it??



Register or Log In To remove these advertisements.

08-13-2023, 09:53 PM	#419
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 5 year update LOL. Fired up the truck finally. 385 fast burn GM crate motor. I had been dreading installing all new wiring and finally started so I could get this thing running. Using American Autowire kit like I did on my 62 Impala. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.