TX Smorgasbord of Chevy Truck Parts - 47-54.1

[TX3100Guy]

As I near completion of the refurbishment/restoration of my 1953 Chevy 5-window pickup, I find myself with a vast smorgasbord of leftover parts. The photo below shows a bunch of them on one of my trusty Harbor Freight blankets. I have inserted an alphabetic identifier on a few of them that might be noteworthy.



Here is a legend to identify the ones I called out. The prices listed are just a suggestion, make me an offer.

A - Front bench seat brackets. (not including connector) - SOLD
B - Starter motor with stomp starter bracket - $50
C - Harrison heat box (listed separately in this forum) - $300
D - Two drum brake wheel cylinders - $25
E - Two brown arm rests and two door levers - $40
F - Valve cover - $30
G - Draft tube from 261 cubic inch inline 6 - $50
H - Front parking lights with two extra glass lens and on extra chrome piece - $50
I - Tail light buckets, two left and right with three chrome surrounds, and three different red lens - $30
J - Spin on oil filter converter and assorted brass fittings - $20
K - Water pump thermostat housing pieces - $25
L - Non Chevy tail light housings and two extra red lens - $50
M - Glove box insert - $20
N - Two engine side plates - $30

If you are interested in any of these parts, feel free to send me a PM with any questions or offers. If you need any additional up close photos of any item(s), just let me know and I'll send them along.

I live in the North Dallas area and prefer local pickup of these items, but other than the starter (which is heavy) I'd be willing to package and ship any of these items to you, but you will have to cover the cost of shipping.

Thanks.

[jweb]

I will take the seat racks (A). Let me know shipping cost to 97306 and how you want paid.

I can also send a shipping label if that's easier.

[TX3100Guy]

Originally Posted by jweb

I will take the seat racks (A). Let me know shipping cost to 97306 and how you want paid.

I can also send a shipping label if that's easier.

I have them securely boxed up at this point. The box is 21 x 10 x 4 and weighs almost 8 pounds. If you'd like to send me a shipping label that would be great.

You can pay for the seat brackets via PayPal, Zelle, or Venmo. For either of them my email address is rfkirk@gmail.com. For Venmo my user name is RFKirk

[jweb]

Originally Posted by TX3100Guy

I have them securely boxed up at this point. The box is 21 x 10 x 4 and weighs almost 8 pounds. If you'd like to send me a shipping label that would be great.

You can pay for the seat brackets via PayPal, Zelle, or Venmo. For either of them my email address is rfkirk@gmail.com. For Venmo my user name is RFKirk

I just sent a Venmo payment. Please PM me your home address , so I can make a proper FedEx label. Then I will email you the label.

Thanks

[TX3100Guy]

Originally Posted by jweb

I just sent a Venmo payment. Please PM me your home address , so I can make a proper FedEx label. Then I will email you the label.

Thanks

I already received the finds via Venmo, thank you.

My name and address is as follows:

Bob Kirk
2055 Chatfield Lane
Lucas, TX 75002

phone: 972-985-7414
email: rfkirk@gmail.com

I have no issue with FedEx, if UPS is less expensive feel free to use them too.

[jweb]

Originally Posted by TX3100Guy

I already received the finds via Venmo, thank you.

My name and address is as follows:

Bob Kirk
2055 Chatfield Lane
Lucas, TX 75002

phone: 972-985-7414
email: rfkirk@gmail.com

I have no issue with FedEx, if UPS is less expensive feel free to use them too.

Thanks Bob, you should have an email from FedEx with the label. Let me know if you need anything else.

[TX3100Guy]

Originally Posted by jweb

Thanks Bob, you should have an email from FedEx with the label. Let me know if you need anything else.

Just got it and printed it. Headed to my FedEx office in a bit.

Many thanks.

Bob

[TX3100Guy]

Originally Posted by jweb

Thanks Bob, you should have an email from FedEx with the label. Let me know if you need anything else.

Dropped off 30 min ago.