Still need trim clips... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MrGoodpliers · 08-13-2004, 08:03 AM

I'm still looking for upper trim clips for '69 short fleet, push-in and screw-in type. Tried repos, but no good. HEEELLLLPPPP!!!!!!!

**Tim Christian** · 08-13-2004, 08:12 PM

I have a set on a NOS set of upper bed trim but they are the stick on type from GM it will probably be hard to find NOS push-in and screw-in type.

MrGoodpliers · 08-16-2004, 07:37 AM

Heck, I'm not looking for NOS, I'd love to have some originals. They could even be a little crusty as long as the spring is still there and they HOLD THE TRIM ON, unlike these repos!

billsbowtie · 08-16-2004, 07:15 PM

do you have a pic. of what you need i may have a few

MrGoodpliers · 08-17-2004, 08:09 AM

I need 1 point for the front fender, 19 push-ins (center in pic) and 16 bolt-ons (the one pictured is missing the spring).

cwilli84 · 08-17-2004, 08:15 AM

Try Mothertruckers, I needed the tip one also and he said he might have some. Also look online for CJ fastener they usually have lotsa automotive trim fasteners. Good luck

billsbowtie · 08-17-2004, 11:21 PM

i no i dont have that many but i will check to see what i have thanks

billsbowtie · 08-18-2004, 09:00 PM

i didn't have anything that would help you sorry

MrGoodpliers · 08-19-2004, 07:37 AM

Thanks for looking... I ordered some yesterday from Modern Chevrolet, a dealership in N.C. with an extensive classic parts dept. Get out your checkbook, though, the push-in clips are $3.21 each! But, these are genuine GM so they'll do the job. Check them out at www.oldmusclecars.com or call 1.800.722.4828.

08-13-2004, 08:03 AM	#1
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Still need trim clips... I'm still looking for upper trim clips for '69 short fleet, push-in and screw-in type. Tried repos, but no good. HEEELLLLPPPP!!!!!!! __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

08-16-2004, 07:37 AM	#3
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Heck, I'm not looking for NOS, I'd love to have some originals. They could even be a little crusty as long as the spring is still there and they HOLD THE TRIM ON, unlike these repos! __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

08-17-2004, 08:09 AM	#5
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	I need 1 point for the front fender, 19 push-ins (center in pic) and 16 bolt-ons (the one pictured is missing the spring). Attached Images __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

08-17-2004, 08:15 AM	#6
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	Clips Try Mothertruckers, I needed the tip one also and he said he might have some. Also look online for CJ fastener they usually have lotsa automotive trim fasteners. Good luck __________________ Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD

08-19-2004, 07:37 AM	#9
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Thanks for looking... I ordered some yesterday from Modern Chevrolet, a dealership in N.C. with an extensive classic parts dept. Get out your checkbook, though, the push-in clips are $3.21 each! But, these are genuine GM so they'll do the job. Check them out at www.oldmusclecars.com or call 1.800.722.4828. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

08-13-2004, 08:12 PM	#2
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I have a set on a NOS set of upper bed trim but they are the stick on type from GM it will probably be hard to find NOS push-in and screw-in type.

08-16-2004, 07:15 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	do you have a pic. of what you need i may have a few

08-17-2004, 11:21 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i no i dont have that many but i will check to see what i have thanks

08-18-2004, 09:00 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i didn't have anything that would help you sorry

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.