What do these wires do? Neutral/Safety Switch - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kitsbeach** · 10-13-2024, 02:26 PM

I'm changing from a manual to an automatic on my C20 so had to extend the green reverse light wires from under the hump to the neutral safety/reverse light switch.

The blue wires are my extension (only colour I had handy).

The yellow and purple wires are my original clutch safety switch, which popped right on to the neutral safety position on the automatic neutral/reverse switch.

Name: Reverse lights wiring-4.jpg
Views: 41
Size: 60.4 KB

Name: Reverse lights wiring-4.jpg
Views: 41
Size: 60.4 KB

Name: Reverse lights wiring-3.jpg
Views: 42
Size: 63.6 KB

Name: Reverse lights wiring-2.jpg
Views: 42
Size: 63.1 KB

Started it up. Everything works.

Name: Reverse lights wiring-1.jpg
Views: 42
Size: 39.2 KB

10-13-2024, 02:26 PM	#26
kitsbeach Senior Member Join Date: May 2014 Location: Vancouver, BC Posts: 591	Re: What do these wires do? Neutral/Safety Switch I'm changing from a manual to an automatic on my C20 so had to extend the green reverse light wires from under the hump to the neutral safety/reverse light switch. The blue wires are my extension (only colour I had handy). The yellow and purple wires are my original clutch safety switch, which popped right on to the neutral safety position on the automatic neutral/reverse switch. Started it up. Everything works. __________________ Kitsbeach (Ken) 1967 C10 LWB (now SWB) Fleetside 6cyl Saginaw three-on-the-tree "No Frills" 1980 C20 Long to short & static drop "Square One"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.