KS 3 Original "Style" Jacks F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 10-01-2014, 06:56 PM

Not sure these jacks are original to the 67-72 trucks but are all very similar in that style. Not restored, just solvent washed, oiled and tested for operation. All three lifted my '71 4x4 1/2 ton running 31/10.50/15's on 15x8 rallies on cement floor. The two smaller jacks lifted the tire 3'' off the floor and the larger jack lifted 5'' off the floor.

The two smaller jacks measure 7 1/4'' retracted vrs. 15 3/4'' extended. Only have the one folding jack handle for these two jacks. Handle mearures 49'' long open w/9'' angled handle, 29'' folded in. First jack buyer gets the handle, second jack buyer gets jack only. $50 shipped for the single jack, $65 shipped for jack with handle. One jack has an " A " stamped on the base, nothing on the other jack base ??

Larger jack on left is 8'' retracted vrs. 17 3/4'' extended. Handle for it measures 46'' open with 9'' angled handle, 29'' folded in. This jack is physically a bit larger than the other two. For 3/4 or 1 ton maybe, not sure and not saying so. Has an " A " stamped on the base ?? $75 shipped for this jack, heavier with more shippng costs.

Can do more pics if needed. Money order or $$ only, do not have Paypal.

LostMy65 · 10-01-2014, 10:54 PM

I'll take the best of the two smaller Jacks along with the handle.

LostMy65 · 10-02-2014, 12:39 AM

Oops, Actually I'll pass.

hounddogs! · 10-02-2014, 11:29 AM

I'll take the better of the small jacks along with the handle. PM me your info for MO/check.

**JJorgensen52** · 10-02-2014, 11:41 AM

Large jack looks like a square body (73-87) unit, they mounted under the hood on the driver's inner fender.

**Ironhorse** · 10-02-2014, 12:53 PM

One small jack and handle SOLD to hounddogs! PM with payment info to follow, thanks for the purchase.

One small jack ONLY and the large jack w/handle still available.

The large jack is simialr to the square bodied, I had an 82, 88, & 91 4x4 Suburban but the jack in each of those had a ''dropped" and "curved" lip to the saddle. This jack is only curved at both ends of the saddle. ??

**Ironhorse** · 10-04-2014, 09:22 AM

Saturday morning bump. Large jack with handle and one small jack without handle still available. Money order or $$, do not have Paypal account.

**Ironhorse** · 10-08-2014, 10:48 PM

Wednesday night bump, still have the large jack with handle and the smaller jack, no handle.

**Ironhorse** · 10-10-2014, 05:24 PM

ttt bump

**gmc 2500 4x4** · 10-15-2024, 03:18 PM

Old thread but I see u have a large jack like I have and just looking for info

**Ironhorse** · 10-15-2024, 08:43 PM

Sorry but never did come up with any solid information about the different jacks. Maybe different vendors supplying to GM across the country? As I mentioned earlier in the thread, having owned 3 square body Suburbans each jack had a curved lip to capture the bumper edge when jacking.

**gmc 2500 4x4** · 10-15-2024, 08:55 PM

And this one does not sit flat either..u can see the bottom

10-01-2014, 06:56 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	3 Original "Style" Jacks F/S Not sure these jacks are original to the 67-72 trucks but are all very similar in that style. Not restored, just solvent washed, oiled and tested for operation. All three lifted my '71 4x4 1/2 ton running 31/10.50/15's on 15x8 rallies on cement floor. The two smaller jacks lifted the tire 3'' off the floor and the larger jack lifted 5'' off the floor. The two smaller jacks measure 7 1/4'' retracted vrs. 15 3/4'' extended. Only have the one folding jack handle for these two jacks. Handle mearures 49'' long open w/9'' angled handle, 29'' folded in. First jack buyer gets the handle, second jack buyer gets jack only. $50 shipped for the single jack, $65 shipped for jack with handle. One jack has an " A " stamped on the base, nothing on the other jack base ?? Larger jack on left is 8'' retracted vrs. 17 3/4'' extended. Handle for it measures 46'' open with 9'' angled handle, 29'' folded in. This jack is physically a bit larger than the other two. For 3/4 or 1 ton maybe, not sure and not saying so. Has an " A " stamped on the base ?? $75 shipped for this jack, heavier with more shippng costs. Can do more pics if needed. Money order or $$ only, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 10-01-2014 at 07:03 PM.

10-01-2014, 10:54 PM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 3 Original "Style" Jacks F/S I'll take the best of the two smaller Jacks along with the handle. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

10-02-2014, 12:39 AM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 3 Original "Style" Jacks F/S Oops, Actually I'll pass. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

10-02-2014, 11:29 AM	#4
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 887	Re: 3 Original "Style" Jacks F/S I'll take the better of the small jacks along with the handle. PM me your info for MO/check. __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

10-02-2014, 11:41 AM	#5
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: 3 Original "Style" Jacks F/S Large jack looks like a square body (73-87) unit, they mounted under the hood on the driver's inner fender. __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

10-02-2014, 12:53 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 3 Original "Style" Jacks F/S One small jack and handle SOLD to hounddogs! PM with payment info to follow, thanks for the purchase. One small jack ONLY and the large jack w/handle still available. The large jack is simialr to the square bodied, I had an 82, 88, & 91 4x4 Suburban but the jack in each of those had a ''dropped" and "curved" lip to the saddle. This jack is only curved at both ends of the saddle. ?? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-04-2014, 09:22 AM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 3 Original "Style" Jacks F/S Saturday morning bump. Large jack with handle and one small jack without handle still available. Money order or $$, do not have Paypal account. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-08-2014, 10:48 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 3 Original "Style" Jacks F/S Wednesday night bump, still have the large jack with handle and the smaller jack, no handle. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-10-2014, 05:24 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 3 Original "Style" Jacks F/S ttt bump __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-15-2024, 03:18 PM	#10
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: 3 Original "Style" Jacks F/S Old thread but I see u have a large jack like I have and just looking for info Attached Images

10-15-2024, 08:43 PM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 3 Original "Style" Jacks F/S Sorry but never did come up with any solid information about the different jacks. Maybe different vendors supplying to GM across the country? As I mentioned earlier in the thread, having owned 3 square body Suburbans each jack had a curved lip to capture the bumper edge when jacking. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-15-2024, 08:55 PM	#12
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: 3 Original "Style" Jacks F/S And this one does not sit flat either..u can see the bottom

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.