NC WTB: NOS 69-72 lower moulding retaining clips - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**omodified** · 09-21-2024, 01:16 PM

As the description says, I’m looking for 22 NOS lower moulding retaining clips for 69-72. These are the type with the stud. I already have the stick on type. Let me know if you can help.

**omodified** · 09-27-2024, 08:29 PM

TTT. I could make some nice used pieces work too.

**omodified** · 10-05-2024, 09:03 AM

Still looking for nice used or NOS

**omodified** · 10-22-2024, 09:04 PM

Another week, another bump. I found 12 NOS clips this weekend at the C10 Fall Revival, but there was no way I was paying $40 per clip. So, I’m still looking for NOS or nice used.

**1970cstblazer** · 10-23-2024, 07:40 AM

You have 3940714 pictured in your first post. 3940714 morphed into 3940497 in 12/1981 which again morphed to 342999 in 11/1990. I have also seen 3941503 and 3940496 which morphed into 3940497 in 12/1990 cited in partsbooks.

Pic of 342999:

**1970cstblazer** · 10-23-2024, 09:45 AM

Also originally,

Some mounting locations on the truck used this style of 4" lower clips that pushed on instead of bolted on.

**omodified** · 10-23-2024, 03:08 PM

Quote:

Originally Posted by 1970cstblazer

You have 3940714 pictured in your first post. 3940714 morphed into 3940497 in 12/1981 which again morphed to 342999 in 11/1990. I have also seen 3941503 and 3940496 which morphed into 3940497 in 12/1990 cited in partsbooks.

Thank you for the part number info. I can expand my search a bit. I do have a bunch of the 342999 and they are about 1/8” too short for them to work as intended. I did find a post here regarding this fact. I do want the bolt on type as that is the size hole I drilled per the assembly manual. Also didn’t want to risk messing up the paint with the push in style.

**72ironmike** · 10-23-2024, 03:44 PM

I may have some, How many do you need ?

**omodified** · 10-23-2024, 04:45 PM

Quote:

Originally Posted by 72ironmike

I may have some, How many do you need ?

Thanks Mike. I’m looking for up to 22 pieces, either NOS or nice ones that I can restore.

**72ironmike** · 10-23-2024, 08:01 PM

Quote:

Originally Posted by omodified

Thanks Mike. I’m looking for up to 22 pieces, either NOS or nice ones that I can restore.

So sorry, I have the push in style ! Not sure they are even NOS.

**omodified** · 10-23-2024, 08:51 PM

Quote:

Originally Posted by 72ironmike

So sorry, I have the push in style ! Not sure they are even NOS.

Thank you for checking.

**omodified** · 12-18-2024, 09:35 PM

Found 11 pieces. Still looking for 11 more.

**atog** · 12-24-2024, 02:20 AM

I have 11 with the proper nuts $120 shipped

**omodified** · 12-24-2024, 10:41 PM

Quote:

Originally Posted by atog

I have 11 with the proper nuts $120 shipped

PM sent.

**atog** · Yesterday, 01:19 AM

Picture installed

09-21-2024, 01:16 PM	#1
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,033	WTB: NOS 69-72 lower moulding retaining clips As the description says, I’m looking for 22 NOS lower moulding retaining clips for 69-72. These are the type with the stud. I already have the stick on type. Let me know if you can help. Attached Images __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848

09-27-2024, 08:29 PM	#2
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,033	Re: WTB: NOS 69-72 lower moulding retaining clips TTT. I could make some nice used pieces work too. __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848

10-05-2024, 09:03 AM	#3
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,033	Re: WTB: NOS 69-72 lower moulding retaining clips Still looking for nice used or NOS __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848

10-22-2024, 09:04 PM	#4
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,033	Re: WTB: NOS 69-72 lower moulding retaining clips Another week, another bump. I found 12 NOS clips this weekend at the C10 Fall Revival, but there was no way I was paying $40 per clip. So, I’m still looking for NOS or nice used. __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848

10-23-2024, 07:40 AM	#5
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,836	Re: WTB: NOS 69-72 lower moulding retaining clips You have 3940714 pictured in your first post. 3940714 morphed into 3940497 in 12/1981 which again morphed to 342999 in 11/1990. I have also seen 3941503 and 3940496 which morphed into 3940497 in 12/1990 cited in partsbooks. Pic of 342999: __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

10-23-2024, 09:45 AM	#6
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,836	Re: WTB: NOS 69-72 lower moulding retaining clips Also originally, Some mounting locations on the truck used this style of 4" lower clips that pushed on instead of bolted on. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

10-23-2024, 03:44 PM	#8
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,060	Re: WTB: NOS 69-72 lower moulding retaining clips I may have some, How many do you need ?

12-18-2024, 09:35 PM	#12
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,033	Re: WTB: NOS 69-72 lower moulding retaining clips Found 11 pieces. Still looking for 11 more. __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848

12-24-2024, 02:20 AM	#13
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,540	Re: WTB: NOS 69-72 lower moulding retaining clips I have 11 with the proper nuts $120 shipped Attached Images

Yesterday, 01:19 AM	#15
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,540	Re: WTB: NOS 69-72 lower moulding retaining clips Picture installed Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.