|
01-02-2025, 11:43 AM
|
#1 |
|
Active Member
 Join Date: Feb 2009
Location: Ben Wheeler, TX
Posts: 123
|
wiper problem
I'm in the final stages of my frame off restoration on a '72 SWB chevy. When I put my wiper arms on they go the wrong direction. The park position is when they are up. If I then remove them and put them down where they belong and turn them on they attack the cowl. It seems like they are reversed. What's going on?
__________________
72 Sierra Grande 2500 BB 72 Sierra 2500, 42K miles, factory buckets 72 Cheyenne 20 72 Chevy SWB, Factory BB, Leaf Spring |
|
|
|
01-02-2025, 11:45 AM
|
#2 |
|
All stock and staying that way
  
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,883
|
Re: wiper problem
It is possible that the crank arm mounted to the motor is 180 degrees off. IIRC, the crank arm should be pointed down when the motor is in the park position.
I did have a defective wiper motor with an improper park position. I could not rectify it so I replaced it with another motor, and now all is well.
__________________
1970 K/5 Blazer CST 4WD, TOTM winner December 2024! Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..  1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...  2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
|
|
|
|
01-02-2025, 12:35 PM
|
#3 |
|
The Older Generation
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,836
|
Re: wiper problem
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
01-04-2025, 10:39 PM
|
#4 |
|
Senior Member
Join Date: Feb 2022
Location: Ca
Posts: 639
|
Re: wiper problem
Thank you for this post. After reading, I thought to myself that I think I mounted the arm 180 out. I had these off and on before the fire and working correctly. Disassembled for redo after fire, I reinstalled last week but was 180 out. I saw this post and thought to myself, I think I mounted wrong. Sure enough, they are mounted wrong. That would have really been a bummer if the arms had swung down on newly painted cowl and hood.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
