Rear brake cable connection in drum

[data89]

I've installed the rear brake cables. Question is in the drum there is no brake lever or strut to attach the spring part of the cable to. I am assuming the previous owner removed them, or is there a different way to connect? '69 Chevy pickup. Aren't the drum brakes all the same on '67-'70? Apparently the previous owner just cut the cables and remove the strut and brake lever???

[Jason Banks]

That's probably exactly what happened. Or it rusted to dust....

Have you seen this page:
https://www.pbase.com/nufsed/drumbrake

[jayoldschool]

I don't know why this was common. It was the same on my 65. Cables cut at the backing plates, and missing the park brake hardware inside. Those parts aren't repopped, so I had to get used ones. Luckily the 67-up stuff fits. Added the cables, and the under dash handle, and presto, parking brake. I can understand disconnecting, but why cut and trash all the hardware?

[Rust_never_sleeps]

Company truck? ;-) I've worked with guys that would have done crap like that

[jayoldschool]

Maybe. Mine did have a Mico hydraulic parking brake plumbed in at some point. Still has the handle on the dash, and the old line stubs sticking out of the firewall.

[Rust_never_sleeps]

Originally Posted by jayoldschool

Maybe. Mine did have a Mico hydraulic parking brake plumbed in at some point. Still has the handle on the dash, and the old line stubs sticking out of the firewall.

Ah, so maybe tied into a PTO or similar