The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-10-2004, 06:33 PM   #1
JIMs70GMC
user # 2756
 
JIMs70GMC's Avatar
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
2 holleys for trade w/ pics

Ones a square bore the other a spread bore. Both have electric choke, vac. sec. The spread bore was purchased by my neighbor for a problem that ended up not being carb related, he gave me the carb when he moved. The square bore was on a 305 in a 82 C20 you can see the adapter.
I'd like to trade these for a H052 locker with or with out the gears.













__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.

1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

Last edited by JIMs70GMC; 08-10-2004 at 06:52 PM.
JIMs70GMC is offline   Reply With Quote
Old 08-11-2004, 10:55 PM   #2
FRANKIEPOTATAS
Registered User
 
Join Date: Oct 2003
Location: San Francisco Bay Area
Posts: 63
let me know if you want to sell that spreadbore
FRANKIEPOTATAS is offline   Reply With Quote
Old 08-30-2004, 02:02 PM   #3
72ChevyRock
Registered User
 
Join Date: Jul 2004
Location: Albuquerque, NM
Posts: 55
Which is the square bore, the clean one or the dirty one? I have a 307 with a two-barrel and would like to upgrade to the 4-barrel. I would like to do this without changing the manifold if the adapter would fit the 307. As you can tell, I'm not too smart when it comes to carbs. I am learning as I go.
72ChevyRock is offline   Reply With Quote
Old 08-30-2004, 03:15 PM   #4
JIMs70GMC
user # 2756
 
JIMs70GMC's Avatar
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
The dirty one is the square bore, the adapter goes between a 4 barrel spread bore and 4 barrel square bore. I guess I need to come up with some prices. Sure would like a locker for my H052, though.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.

1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm
JIMs70GMC is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com