MD want to buy spindles and seat cover etc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 11-02-2025, 12:58 PM

Looking for a pair of drop spindles 2 or 2.5" for the 72 C10 I am working on. Would like to run the stock joints, rotors & calipers if possible.

I could also use a good pair of rear springs. The originals are shot. would prefer stock height but would consider 1-2" drop as well. They had spacers in them to keep it from collapsing that I did not notice until I put the 2" blocks on the trailing arms. Now it looks like the truck has worms.

Also looking for a blue bench seat cover in nice shape . Does not matter if hounds tooth or just regular vinyl. It will be going in a medium blue truck.

I can buy outright or I have loads of parts to trade.

Shipping would be to Salisbury MD 21801

Thanks

**richard2717** · 11-16-2025, 02:19 PM

I found a decent set of original HD springs I am going to try but still looking for everything

11-02-2025, 12:58 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,401	want to buy spindles and seat cover etc Looking for a pair of drop spindles 2 or 2.5" for the 72 C10 I am working on. Would like to run the stock joints, rotors & calipers if possible. I could also use a good pair of rear springs. The originals are shot. would prefer stock height but would consider 1-2" drop as well. They had spacers in them to keep it from collapsing that I did not notice until I put the 2" blocks on the trailing arms. Now it looks like the truck has worms. Also looking for a blue bench seat cover in nice shape . Does not matter if hounds tooth or just regular vinyl. It will be going in a medium blue truck. I can buy outright or I have loads of parts to trade. Shipping would be to Salisbury MD 21801 Thanks __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-16-2025, 02:19 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,401	Re: want to buy spindles and seat cover etc I found a decent set of original HD springs I am going to try but still looking for everything __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.