The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-03-2026, 12:49 PM   #9
pjmoreland
Senior Member

 
pjmoreland's Avatar
 
Join Date: Jan 2005
Location: CA
Posts: 7,025
Re: Fuel system hose sizes?

An EEC tank will have some rubber lines attached to it that could be cracked. There is a short section that runs from the filler neck to the top of the tank. Then there is another one that connects the tank to the line that loops up into the rear passenger pillar.

If you installed a fuel pump that has three attachment ports, and you attached the return port to the vent line, then the pump will be sending fuel back up the vent line to the tank, which is not its original purpose. The tank will have no way to vent excess pressure in this scenario.
pjmoreland is online now   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com