The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-09-2026, 03:11 PM   #7
theastronaut
Registered User
 
theastronaut's Avatar
 
Join Date: May 2011
Location: Anderson SC
Posts: 4,044
Re: Manual Rack and pinion for 72C10?

It'll be hard/impossible to find a rack with a slow enough ratio to make it reasonably easy to turn at parking lot speeds. My stock manual steering box has a 20:1 ratio and with added caster + radials its a bear to get it parked in tight areas. Any quicker ratio and I wouldn't be able to park it.

You might have to look into a regular rack, loop the lines, and use a reversed steering quickener in the steering shaft to slow down the ratio and multiply leverage. At that point, why not add electric assist into the column so you get the benefit of a quicker ratio rack and it's not hard to park? About the only other option is to go back to skinny bias plies with zero caster to make a normal rack easy enough to steer, it just isn't going happen with modern tires, alignment specs, and a normal ratio rack- that's why no one offers them.
theastronaut is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com