76 K10 hubs shaky top to bottom

[MJN]

Originally Posted by K10-Kansas

Good idea. Do you think this is the right u-joint? LMC shows the axle u-joint for 1973-87 4wd, 1/2 ton. Mine is a Dana 44 8F

I don't bother with LMC for these parts. RockAuto has them all, and cheaper for better parts;
Its the same ujoint used on both Dana 44's and 10 bolts, 73-87 1/2 ton and 3/4 tons.
Here is the axle shaft ujoint https://www.rockauto.com/en/moreinfo...t=2392&jsn=614

Spindle bearing kit- https://www.rockauto.com/en/moreinfo...t=1672&jsn=637

Axle shaft seals- that go in the housing; https://www.rockauto.com/en/moreinfo...t=1852&jsn=624

Here is a pdf of the factory service manual if you don't have one, same info thats in the '76 supplement manual.
http://www.73-87chevytrucks.com/tech...ice_Manual.pdf

[K10-Kansas]

Originally Posted by MJN

I don't bother with LMC for these parts. RockAuto has them all, and cheaper for better parts;
Its the same ujoint used on both Dana 44's and 10 bolts, 73-87 1/2 ton and 3/4 tons.
Here is the axle shaft ujoint https://www.rockauto.com/en/moreinfo...t=2392&jsn=614

Spindle bearing kit- https://www.rockauto.com/en/moreinfo...t=1672&jsn=637

Axle shaft seals- that go in the housing; https://www.rockauto.com/en/moreinfo...t=1852&jsn=624

Here is a pdf of the factory service manual if you don't have one, same info thats in the '76 supplement manual.
http://www.73-87chevytrucks.com/tech...ice_Manual.pdf

Thanks a ton! I really appreciate it.