F/s 67 Gmc C15 Longstep Lots Of Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72bigblock4wd · 08-15-2004, 07:50 PM

I've decided to sell my 67 GMC to clear out my garage for now. I will post some pics, but here's my best description of the truck. It has a very solid frame, the front clip is solid with just a little rust in the bottom of the inner fender, outer fender and rad. support under the battery tray. The 67-68 hood is in very good shape, it just needs a little work on the front (small dent), but there's no rust in it. The cab is very solid, the cab corners and rear floor need a little attention. The rockers are okay, the rest of the floor is pretty solid. In the pics you will see a couple of patches here and there that the P/O put in. The bedsides are solid other than a little rust where the fenders bolt to it. Other than that the bedsides are in pretty good shape. The step fenders have no rust, but are both dented up a bit. Nothing beyond repair, but they both need some work. All the glass in the cab is in good shape, the doors are solid, and the window mechanisms and door latch mechanisms work very well. The truck also has the original tach gauge cluster in it for a V8, which I am selling seperately unless the person who buys the truck wants it. I also have the automatic steering column which will go with the truck. It has the auto tranny crossmember in the frame, and a 12-bolt 3.73:1 open diff. The cab is currently setting on the frame and the front clip is off the truck. I have no title for the truck, but will provide the buyer with a bill of sale that should enable them to apply for a clear vehicle title in their state. I'm asking $500 for the truck w/o the tach dash cluster.

72bigblock4wd · 08-15-2004, 08:05 PM

For some reason the pics don't want to upload. You can email me at mhavanwyk@msn.com and I will email you pics of the truck.

I also have some parts for sale.

1. 3-core radiator for 67-72 truck, excellent cond. asking $100 obo. + shipping

2. 60-72 chevrolet tailgate, just a couple of small spots of surface rust, no major rust or dents, asking $75 + shipping.

3. Late model Chevrolet Steering Wheel, $40 shipped to your door.

4. Late 70's Chevrolet Steering Wheel, $35 shipped to your door.

5. 73-87 Chevy/GMC BBC engine towers, will fit 67-72 with a spacer on top of the top frame rail, $75 shipped to your door.

72bigblock4wd · 08-15-2004, 08:13 PM

6. tach gauge cluster complete. I do not know if this works or not. $150 + shipping.

7. 16x8 American Racing Wheels with Goodyear Wrangler AT/S 305/70R16, 75-80% tread, $400 firm, no shipping.

8. Cab to Door weatherstripping set, new in box, $40 shipped to your door.

For some reason, I can't seem to attach any of these pics either, please email me at mhavanwyk@msn.com if you are interested and I will email pics of the item(s). Thanks!!

Inspector722 · 08-15-2004, 09:11 PM

I am interested in the tach. What is shipping to 77705?

teeitup · 08-15-2004, 09:17 PM

I'll take the tach if Inspector doesn't want it.

72bigblock4wd · 08-15-2004, 09:22 PM

Inspector 722, with shipping it's $169 to your door. Let me know if you want it, otherwise it's going to Teeitup. Thanks!

Inspector722 · 08-15-2004, 09:43 PM

PM sent

ZOOMY · 08-16-2004, 02:23 AM

What happened to the 454/TH400 that was going into it ? For Sale ?

72bigblock4wd · 08-16-2004, 06:52 AM

Zoomy, I still have the 454, sold the TH400 do my dad. If you are interested in the 454 it's a '78 truck motor. It has not been rebuilt as far as I can tell, but it ran excellent, still had the original intake, carb, exhaust manifolds on it. I took the carb & intake off as well as the water pump and harmonic balancer and exh. manifolds to clean it up and give it a good paint job. I would sell the motor complete with intake, carb, water pump, a new mech. fuel pump, HEI, exhaust manifolds, alternator, and BBC power steering pump for $600. If you're interested let me know and I can get a couple of pics to email to you.

72bigblock4wd · 08-16-2004, 11:54 PM

Just a quick note, there are a couple of other parts that I forgot to put on the thread. I also have an excellent set of reverse/backup lights with the brackets for a stepside, $40 to your door.
I have a complete set of front bumper brackets for a 67-70, in good shape, I'll take $35 shipped to your door. As before, please email me at mhavanwyk@msn.com if you're interested in any of these parts and I will reply to your email and attach pics. Thanks!
Mike

68C10STEPSIDE · 08-17-2004, 07:48 AM

email sent.

Inspector722 · 08-17-2004, 08:07 AM

Look at my sig at the bottom of this message. Iwould like to have the tach cluster, and have email you three times so far but have not gotten anything back yet.
Thanks, Stephen

72bigblock4wd · 08-17-2004, 07:09 PM

Inspector, I noticed the email in the sig last night and sent you an email with a couple pics attached. Let me know if you didn't get it. I got your original PM, but not your emails. Sorry.
68c10stepside I sent a reply with the pics you requested, let me know if you get them.
Thanks!

Inspector722 · 08-17-2004, 08:36 PM

Will take the Tach. Sent email. Thanks, Stephen

72bigblock4wd · 08-17-2004, 09:09 PM

I'll try to send you an invoice on Paypal yet tonight. I haven't gotten your email yet, but if you didn't already do so email my the address you want it shipped to. Thanks Stephen!
Mike

Inspector722 · 08-18-2004, 04:01 PM

Funds sent by Paypal. THANKS!

Don't forget the wires if you have them. Do you have anything else to give away?

72bigblock4wd · 08-19-2004, 10:38 PM

Okay, the truck sold today along with the tailgate and radiator. The tach cluster is also gone. Thanks!

72ChevyRock · 09-05-2004, 08:51 PM

In what condition are the steering wheels? What did they come off of? Will they fit the original 72 steering column? Any info. would be great, thanks.

67ChevyC10Stepside · 09-05-2004, 09:12 PM

can i get pics of the tail/backup lights to chevy70@zoominternet.net please?

72bigblock4wd · 09-06-2004, 11:34 AM

72ChevyRock, the remainaing steering wheel that I have is off of a '78 Chevy steering column, I assume it would mount on a '67-72 chevy steering column.
It's in good condition with no cracks or gouges in the wheel and includes the centercap and horn mechanism.
67ChevyC10Stepside, I will attach pics of the backup lights to this reply for you.

Anyone else, I still have the 73-87 BBC Frame Towers, which can be adapted for use on a 67-72 by using a spacer on the top frame rail. I will sell these for $40 plus shipping.

I also have a set of 71-72 1/2 ton disc brake spindles I was going to use on my project, but since I've sold the truck I now have no use for them. I will sell them for $75 plus shipping.

I also still have the lift kit and the 67-70 front bumper brackets.

08-15-2004, 07:50 PM	#1
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	F/s 67 Gmc C15 Longstep Lots Of Parts I've decided to sell my 67 GMC to clear out my garage for now. I will post some pics, but here's my best description of the truck. It has a very solid frame, the front clip is solid with just a little rust in the bottom of the inner fender, outer fender and rad. support under the battery tray. The 67-68 hood is in very good shape, it just needs a little work on the front (small dent), but there's no rust in it. The cab is very solid, the cab corners and rear floor need a little attention. The rockers are okay, the rest of the floor is pretty solid. In the pics you will see a couple of patches here and there that the P/O put in. The bedsides are solid other than a little rust where the fenders bolt to it. Other than that the bedsides are in pretty good shape. The step fenders have no rust, but are both dented up a bit. Nothing beyond repair, but they both need some work. All the glass in the cab is in good shape, the doors are solid, and the window mechanisms and door latch mechanisms work very well. The truck also has the original tach gauge cluster in it for a V8, which I am selling seperately unless the person who buys the truck wants it. I also have the automatic steering column which will go with the truck. It has the auto tranny crossmember in the frame, and a 12-bolt 3.73:1 open diff. The cab is currently setting on the frame and the front clip is off the truck. I have no title for the truck, but will provide the buyer with a bill of sale that should enable them to apply for a clear vehicle title in their state. I'm asking $500 for the truck w/o the tach dash cluster.

08-15-2004, 08:05 PM	#2
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	truck pics For some reason the pics don't want to upload. You can email me at mhavanwyk@msn.com and I will email you pics of the truck. I also have some parts for sale. 1. 3-core radiator for 67-72 truck, excellent cond. asking $100 obo. + shipping 2. 60-72 chevrolet tailgate, just a couple of small spots of surface rust, no major rust or dents, asking $75 + shipping. 3. Late model Chevrolet Steering Wheel, $40 shipped to your door. 4. Late 70's Chevrolet Steering Wheel, $35 shipped to your door. 5. 73-87 Chevy/GMC BBC engine towers, will fit 67-72 with a spacer on top of the top frame rail, $75 shipped to your door.

08-15-2004, 09:11 PM	#4
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	I am interested in the tach. What is shipping to 77705? __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

08-15-2004, 09:17 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I'll take the tach if Inspector doesn't want it. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-15-2004, 09:43 PM	#7
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	PM sent __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

08-15-2004, 08:13 PM	#3
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	6. tach gauge cluster complete. I do not know if this works or not. $150 + shipping. 7. 16x8 American Racing Wheels with Goodyear Wrangler AT/S 305/70R16, 75-80% tread, $400 firm, no shipping. 8. Cab to Door weatherstripping set, new in box, $40 shipped to your door. For some reason, I can't seem to attach any of these pics either, please email me at mhavanwyk@msn.com if you are interested and I will email pics of the item(s). Thanks!!

08-15-2004, 09:22 PM	#6
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	Inspector 722, with shipping it's $169 to your door. Let me know if you want it, otherwise it's going to Teeitup. Thanks!

08-16-2004, 02:23 AM	#8
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	454/th400 What happened to the 454/TH400 that was going into it ? For Sale ?

08-16-2004, 06:52 AM	#9
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	Zoomy, I still have the 454, sold the TH400 do my dad. If you are interested in the 454 it's a '78 truck motor. It has not been rebuilt as far as I can tell, but it ran excellent, still had the original intake, carb, exhaust manifolds on it. I took the carb & intake off as well as the water pump and harmonic balancer and exh. manifolds to clean it up and give it a good paint job. I would sell the motor complete with intake, carb, water pump, a new mech. fuel pump, HEI, exhaust manifolds, alternator, and BBC power steering pump for $600. If you're interested let me know and I can get a couple of pics to email to you.

08-16-2004, 11:54 PM	#10
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	Just a quick note, there are a couple of other parts that I forgot to put on the thread. I also have an excellent set of reverse/backup lights with the brackets for a stepside, $40 to your door. I have a complete set of front bumper brackets for a 67-70, in good shape, I'll take $35 shipped to your door. As before, please email me at mhavanwyk@msn.com if you're interested in any of these parts and I will reply to your email and attach pics. Thanks! Mike Last edited by 72bigblock4wd; 08-17-2004 at 12:05 AM.

08-17-2004, 07:48 AM	#11
68C10STEPSIDE Registered User Join Date: Apr 2003 Location: ROMEO, MI Posts: 39	email sent.

08-17-2004, 08:07 AM	#12
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Look at my sig at the bottom of this message. Iwould like to have the tach cluster, and have email you three times so far but have not gotten anything back yet. Thanks, Stephen __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

08-17-2004, 07:09 PM	#13
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	Inspector, I noticed the email in the sig last night and sent you an email with a couple pics attached. Let me know if you didn't get it. I got your original PM, but not your emails. Sorry. 68c10stepside I sent a reply with the pics you requested, let me know if you get them. Thanks!

08-17-2004, 08:36 PM	#14
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Will take the Tach. Sent email. Thanks, Stephen __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

08-17-2004, 09:09 PM	#15
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	I'll try to send you an invoice on Paypal yet tonight. I haven't gotten your email yet, but if you didn't already do so email my the address you want it shipped to. Thanks Stephen! Mike



Register or Log In To remove these advertisements.

08-18-2004, 04:01 PM	#16
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Funds sent by Paypal. THANKS! Don't forget the wires if you have them. Do you have anything else to give away? __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

08-19-2004, 10:38 PM	#17
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	Okay, the truck sold today along with the tailgate and radiator. The tach cluster is also gone. Thanks!

09-05-2004, 08:51 PM	#18
72ChevyRock Registered User Join Date: Jul 2004 Location: Albuquerque, NM Posts: 55	Late Model Steering Wheels In what condition are the steering wheels? What did they come off of? Will they fit the original 72 steering column? Any info. would be great, thanks.

09-05-2004, 09:12 PM	#19
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	can i get pics of the tail/backup lights to chevy70@zoominternet.net please? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

09-06-2004, 11:34 AM	#20
72bigblock4wd Registered User Join Date: Feb 2004 Location: Grand Rapids, Michigan Posts: 194	72ChevyRock, the remainaing steering wheel that I have is off of a '78 Chevy steering column, I assume it would mount on a '67-72 chevy steering column. It's in good condition with no cracks or gouges in the wheel and includes the centercap and horn mechanism. 67ChevyC10Stepside, I will attach pics of the backup lights to this reply for you. Anyone else, I still have the 73-87 BBC Frame Towers, which can be adapted for use on a 67-72 by using a spacer on the top frame rail. I will sell these for $40 plus shipping. I also have a set of 71-72 1/2 ton disc brake spindles I was going to use on my project, but since I've sold the truck I now have no use for them. I will sell them for $75 plus shipping. I also still have the lift kit and the 67-70 front bumper brackets. Attached Images Last edited by 72bigblock4wd; 09-06-2004 at 11:37 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.