292? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1G9M7C0 · 09-13-2004, 11:50 AM

I have a 1970 GMC 4wd, I bought it with a 350 in but would like to put a 292 in it. Has anyone done this swap, if so what all is involved?

*Gee_Emm* · 09-13-2004, 06:43 PM

Change out the engine stands and a new wiring harness, maybe some different rad hoses.

**'68OrangeSunshine** · 09-15-2004, 05:45 AM

If it's a manual tranny, the L6 z-Bar is different from the V8 unit. Upper clutch rod for the L6 is not as bent either.

09-13-2004, 11:50 AM	#1
1G9M7C0 Registered User Join Date: Sep 2004 Location: Reno, NV Posts: 1	292? I have a 1970 GMC 4wd, I bought it with a 350 in but would like to put a 292 in it. Has anyone done this swap, if so what all is involved?

09-15-2004, 05:45 AM	#3
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	If it's a manual tranny, the L6 z-Bar is different from the V8 unit. Upper clutch rod for the L6 is not as bent either. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-13-2004, 06:43 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Change out the engine stands and a new wiring harness, maybe some different rad hoses.



Register or Log In To remove these advertisements.