|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-16-2004, 11:16 AM
|
#1 |
|
Registered User
Join Date: Apr 2004
Location: Calgary, Alberta,Canada
Posts: 1,595
|
Will the steering box off a 87 IROC fit a 72 frame??
Any ideas??
__________________
I know what your thinking.......I have ESPN.  Sometimes it's easier to do things the hard way.  Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!! 
|
|
|
|
09-16-2004, 11:57 AM
|
#2 |
|
.........................
Join Date: Nov 2001
Location: benton, ky
Posts: 288
|
Im pretty sure that one is on the inside of frame and the truck is on outside, So it would be upside down.
__________________
1971 LWB Chevy C-10 350/350 3:42 eaton 
|
|
|
|
|
09-16-2004, 03:59 PM
|
#3 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
It won't fit.
|
|
|
|
|
09-16-2004, 04:10 PM
|
#4 |
|
Registered User
Join Date: Apr 2004
Location: Calgary, Alberta,Canada
Posts: 1,595
|
Sorry. As I won't have the car home until sunday, I haven't looked at the position of the steering box.
__________________
I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!
|
|
|
|
|
09-16-2004, 08:03 PM
|
#5 |
|
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
what is it 69-87 1/2 2wd steering boxes are all the same??? there pretty easy to find, and cheap too
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's  (the family car)1993 Cherokee work ride/weekend wheeler |
|
|
|
|
09-17-2004, 01:26 AM
|
#6 |
|
Senior Member
Join Date: Sep 2004
Location: CANADA
Posts: 1,681
|
68-84 power steering boxs will fit but in 73 they changed the water pump to a longer neck. you can use a 73 and newer pump but you have to change the water pump and move the alternator to passanger side you will need;power steering pump,brackets,water pump ,pitman arm,alt brackets,and pulleys off a 73-84 truck i can have pics i done this swap on my 72 1-ton[all 1/2 to 1-tons run the same stuff]. about2-3 hours to do it is all bolt in.if you can find the 68-72 [steering ]pump the hoses will match with the newer steering box and add the drive pulley you do not have to every thing else .
|
|
|
|
|
09-17-2004, 02:22 AM
|
#7 |
|
Merciless Butcher
Join Date: Oct 2003
Location: CC Nevada
Posts: 1,447
|
It is a whole lot easier to use a 73+ pump and use brackets for a short water pump (they will bolt right on). I have seen the brackets for the power steering pump with a short water pump in several catalogs. Corvettes used the short waterpump up until the early eighties with the newer style power steering pump. You won't have to change anything else.
__________________
Your Bought And Sold....I Got Your Soul! |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
