![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,483
|
Replacement panel Questions
Has any one ever replaced the lower rear pillar on a blazer? I have found them for the trucks but wasn't sure they would fit a blazer. This is the part that is hidden by the rocker panel and is bolted on at the side by two bolts.
If you have replaced them let me know where you got the replacement panel and how much cussin' it involves... Rg
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: Sep 2000
Posts: 4,002
|
Yup the rear door pillar is the same as a pickup. Depending on how high up you go with the patch will be how difflicult the job will be since you will have to drill out the spot welds at the bedside. To get to the rear bolts you will have to take off the rocker box end cap. It might be a little tricky getting the bolts in and out because it is so tight in there.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,483
|
Gee-Emm, I knew you'd know. I've been looking at it and had come to the same conclusion. The good news is it only needs the bottom 2 inches replaced.
Rg
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Sep 2000
Posts: 4,002
|
If it is only 2 inches you might even get away without having to drill out spotwelds on the bedside.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,483
|
Yeah, I can see where it was spot welded on the post and it has good metal well below that point. 'Course you never really know until it's all cut out.
I started removing the bolts on the rocker box cap last night but had two that need to soak or be cut, I'll have a better idea then... Rg
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
![]() |
![]() |
![]() |
#6 |
< 69 Blazer
Join Date: Mar 2004
Location: Nevada, TX
Posts: 293
|
take progress pictures please
|
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,483
|
I'll take pics, but I am notoriously SLOW about getting things done...
Rg
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|