Rim Clear coat removal ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camaro__thunder · 09-17-2004, 10:57 PM

What chemical do I use to get the clear coat off of my rims ? They are starting to get the little mildew look in some spots.Thanks

Brainchild · 09-17-2004, 11:56 PM

I don't have an answer for ya,except have a look over at Mothers.Thats the best in the buisness IMO.

OLDROCK&ROLLER · 09-18-2004, 12:38 PM

I used spray on paint remover in the rattle can. Took 2 or 3 times but works
good. Use lots of soapie water to wash and then dry and spray on a good coat of clear coat. Good Luck..

09-17-2004, 10:57 PM	#1
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Rim Clear coat removal ? What chemical do I use to get the clear coat off of my rims ? They are starting to get the little mildew look in some spots.Thanks __________________ My Project 69 SWB SHAVED BAGGED DOORED

09-17-2004, 11:56 PM	#2
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	I don't have an answer for ya,except have a look over at Mothers.Thats the best in the buisness IMO. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

09-18-2004, 12:38 PM	#3
OLDROCK&ROLLER Registered User Join Date: Feb 2004 Location: WHITEVILLE N.C. Posts: 494	I used spray on paint remover in the rattle can. Took 2 or 3 times but works good. Use lots of soapie water to wash and then dry and spray on a good coat of clear coat. Good Luck.. __________________ 72 CHEYENNE 10 SUPER 468/400/3.73

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.